Ninebot flasher

Ninebot flasher DEFAULT
  •    
  • Published Linked with GitHub

# How to: flash Ninebot ES dash #### You will need: - ST-Link V2 (any one out there will work fine, even the cheaper ones). - ST-Link V2 drivers ([link](https://mega.nz/#!vy4UHCCR!tr5ek3xos5mv1Zofam-1H74x9owBvef0tZ_JTdLLRns)) - Some soldering skills - Any kind of dash from an Ninebot ES scooter - OpenOCD ([download](http://www.freddiechopin.info/en/download/category/4-openocd?download=154%3Aopenocd-0.10.0)) - For Mac: use homebrew and install openocd with the command: `brew install openocd` - Enable telnet ([guide](https://www.rootusers.com/how-to-enable-the-telnet-client-in-windows-10/)) - Dash firmware (find it yourself, atm) - Take note of the dashs Bluetooth name before doing this procedure, if it has Bluetooth enabled. ### First step: #### Solder the board: - First solder your cables just like this picture. ![](https://i.imgur.com/mpMyy04.jpg) - Remember to remove the C15 capacitor. - Connect the cables to your ST-Link, **important**, you need to connect the cables like SWD to SWD and so on, otherwise it will not work. And the VCC connector is going to the 3.3V connector on the ST-Link. - Plug the ST-Link into the computer, an USB extender is recommended! On to next step! ### Second step: #### Connect dash to OpenOCD - First control that the USB is plugged in, then go into the OpenOCD folder with your terminal, and write this command `.\bin-x64\openocd.exe -f .\scripts\interface\stlink-v2.cfg -f .\scripts\target\nrf51.cfg`. - For Mac, use this command: `openocd -f ./scripts/interface/stlink-v2.cfg -f ./scripts/target/nrf51.cfg` - Then you need to open telnet using this command in another terminal: `telnet 127.0.0.1 4444`. - Now it's time for the flashing part, copy the firmware file to openocd folder, run this command `program firmware.bin` - Done! Now it should be using original Ninebot firmware. - If the dash has renamed it self when you search for it in the Bluetooth menu, the dash has now been converted succesfully to a real OEM dash!

Sours: https://hackmd.io/@aJPspKtTS7Gd4_5OLC_zhg/Bki2fcWwE?type=view

Ninebot-Segway Max 

Requirements before modify the Ninebot-Segway Max maximum speed

● Your Ninebot-Segway Max electric scooter must be Bluetooth-enabled

● A Windows 10 PC with BLE

● Ninebot-Flasher

● An official or flashed ESx dashboard (can be extracted from any Ninebot ESx scooter)

● Some disassembling tools

The steps of unlock the Ninebot- Segway Max maximum speed

Step 1: Turn of your electetric scooter.

Step 2: Remove your Max dashboard and unplug it from your scooter.

Step 3: Plug your ESx dashboard into your Max and turn on your scooter.

Step 4: Start Ninebot-Flasher and connect to your scooter. If you're pushed back to the connecting screen, just select your scooter again and click Connect.

Step 5: Hit Ctrl+Alt+A: some buttons should appear, we're only interested in the one named Write ESC Sn. If that doesn't work, please ask on Discord.

Step 6: Get your current Max serial number and replace the 5 first characters with N4GSD (or check table below for any other max speed). Input that serial number in the text field and click Write ESC Sn.

Your new serial number should be displayed. If that's the case, you can reassemble your Max and enjoy your new top speed!

Max speed according to serial numbers:

N4GSD: 30km/h

N4GCD: 25km/h

N4GEA: 20km/h

Attention: Do not connect to the Ninbot App or update firmware while you have the ESx dash connected to your max!

Notice: We remind you that these operations are not without risks: something during the flash can go wrong, the higher power could wear the mechanical parts faster and, finally, the safety of the vehicle will decrease significantly. GearBest blog is not responsible for any damage.



Gearbest GearBest shipping memo - mini banner K

Extensive Product Selection

● Over 300,000 products

● 20 different categories

● 15 local warehosues

● Multiple top brands

Convenient Payment

● Global payment options: Visa, MasterCard, American Express

● PayPal, Western Union and bank transfer are accepted

● Boleto Bancario via Ebanx (for Brazil)

Prompt Shipping

● Unregistered air mail

● Registered air mail

● Priority line

● Expedited shipping

Dedicated After-sales Service

● 45 day money back guarantee

● 365 day free repair warranty

● 7 day Dead on Arrival guarantee (DOA)

Sours: https://www.gearbest.com/blog/how-to/how-to-modify-or-unlock-ninebot-segway-max-electric-scooter-maximum-speed-8729
  1. Amazon weep hole covers
  2. Masculinity and gender roles
  3. Luck.v stock
  4. Discount tag abbr
  5. Costco granola

How to flash your Ninebot Scooter

User avatar
LightningJon
Posts: 1
Joined: Thu Apr 11, 2019 5:12 am

How to flash your Ninebot Scooter

Postby LightningJonThu Apr 18, 2019 6:11 am

Image

(Before doing this whole procedure, try and see if you are one of the lucky few who got an already Bluetooth enabled dashboard. Go right ahead to the step where you download the ESDownG app and test if you can connect. If yes, then just generate your Custom Firmware and flash it with the app, if not, well, good reading and happy disassembly!)

MATERIAL NEEDED

Image

- A disassembled ES2/ES4 Ninebot Dashboard (procedure below)
- A soldering iron and some tin
- A ST-Link V2
- Also long Allen and Hex screwdrivers
(You can get all of this for cheap on Amazon if you don't want to wait for long Alliexpress shipping)


DISASSEMBLY PROCEDURE

Image

Image

Image
(imgur post: https://imgur.com/a/xJSWI1c to zoom on pics)
Screens taken from the original video here: https://www.youtube.com/watch?v=bTMKUIi2EJY

SOLDERING

Image

Connect each cable to your ST-Link.
Each pin's function is normally written on the dongle.
You need to connect the SWD GND cable soldered on the dashboard to the SWD GND pin on your ST-LINK, same for SWD CLK, SWD IO, etc...
You will have 4 cables all in all. Don't forget to remove the C15 capacitor and clean the contacts to avoid shorts.


Image

NOTE: Pay attention to what's written on your ST-Link, you will not necessarily have the pin's functions in the same order, so you'll need to link them accordingly. Also, regarding the VCC/3.3v cable, you only need to attach it to ONE pin, choose one of both.

Since moving your ST-Link around is likely to break your soldering, it is highly recommended to use a USB extender.
Now plug your ST-Link.


SOFTWARE NEEDED
(22/09/2021: updated by Lothean, fixed dead link)
ST-Link V2 drivers (install them):
[Download]
(mirror if Mega link is down) [Download]

ESx dashboard flash software:
[Download](edit by Lothean)

Unzip the archive and run "flash_BLE107.bat"
Read carefully what's written on the screen and follow instructions if necessary.
If the flash was successful, it should be indicated.
Done! Now it should be using original Ninebot firmware.
The dash has now been converted successfully to a real OEM dash!

Re-install your dashboard following the disassembly procedure inverting all the steps. You should have a Bluetooth flashing icon on your dashboard when reconnecting it. Leave it like this.


You can skip all previous steps if you buy an OEM dashboard/if your dashboard is already OEM
US link for verified OEM-compatible dashboard:

[Buy on eBay - Seller: ScooterClone]

Now, go to https://ninebot.scooterhacking.org/
Accept the warning box message.
Let all "Patch!" boxes unticked, do not change anything else to get the most optimized configuration.
Click the Patch! button and download your custom firmware.

Download it to your phone with GoogleDrive or e-mail or whatever.
Download the Bluetooth flashing android application on a 4.0 Bluetooth enabled Android phone:
[Get ES_downG]
(APK mirror if app gets removed)[Download]

Install and launch the app. Make sure your dashboard is still turned on with the flashing bluetooth icon.
Hit the Connect button on the app.
You will get this:
Image

then hit Open bin. Find your custom firmware named DRV(something).zip Make sure it is in ZIP format and that you haven't decompressed it.
When you have loaded the .zip file. Hit the Flash bin button. Wait for the flash to be done; When it says all done, hit the Disconnect button to free the bluetooth communication canal. Download and install the Official Segway Ninebot app:
[Get Segway-Ninebot app]

DO NOT UPDATE TO THE LATEST FIRMWARE, always click the "Later" button.
(Unless you really do want the latest official firmware, but be aware that this will lock the speed limit of your Ninebot to 25km/h and potentially prevent downgrade if any future update decides so).

You can now rename your Ninebot, change the lights, view mileage, etc...
Enjoy!
Last edited by LightningJon on Fri Apr 19, 2019 5:13 am, edited 1 time in total.
User avatar
Lothean
Site Admin
Posts: 142
Joined: Fri Mar 15, 2019 2:40 am
Location: France

Re: How to flash your Ninebot Scooter

Postby LotheanFri Apr 19, 2019 12:28 am

A very detailed guide, thank you so much ;)

EDIT 09/09/2019: added new dashboard flashing method, no telnet, no cmd... and edited links with proper BB code ;)

EDIT 22/09/2019: fixed dead link
jojo83
Posts: 3
Joined: Tue Apr 23, 2019 8:15 pm

Re: How to flash your Ninebot Scooter

Postby jojo83Wed Apr 24, 2019 6:50 am

getting error on 127.0.0.1 4444
says could not open connection the the host , on port 4444 connect failed plz help
lrmnt
Posts: 1
Joined: Fri Apr 26, 2019 3:26 pm

Re: How to flash your Ninebot Scooter

Postby lrmntFri Apr 26, 2019 3:33 pm

Hello!

I've tried to revert BMS from 1.3.3 to 1.2.2 on my ES4 via ES_downG. I created zip file with BMS binaries from this site with following info.txt:

Code: Select all

ES_downG successfully opened and flashed bin, but after that I have error 21. It looks like only one battery had been flashed/
What wrong have I done?
User avatar
Lothean
Site Admin
Posts: 142
Joined: Fri Mar 15, 2019 2:40 am
Location: France

Re: How to flash your Ninebot Scooter

Postby LotheanFri Apr 26, 2019 6:13 pm

Hello!

I've tried to revert BMS from 1.3.3 to 1.2.2 on my ES4 via ES_downG. I created zip file with BMS binaries from this site with following info.txt:

Code: Select all

ES_downG successfully opened and flashed bin, but after that I have error 21. It looks like only one battery had been flashed/
What wrong have I done?
ES DownG does not officially support BMS flashing for the moment. You can try Ninebot Flasher or py9b. If you really can't do with these, use ES Rollback but at your own risks.
getting error on 127.0.0.1 4444
says could not open connection the the host , on port 4444 connect failed plz help
Incorrect connections somewhere.
alfrederp
Posts: 1
Joined: Sun Apr 28, 2019 4:12 am

Re: How to flash your Ninebot Scooter

Postby alfrederpSun Apr 28, 2019 4:14 am

Image
I followed the guide exactly and im getting this error. Connections and soldering are good
ndmccutcheon
Posts: 20
Joined: Fri Apr 26, 2019 2:32 am

Re: How to flash your Ninebot Scooter

Postby ndmccutcheonThu May 02, 2019 5:57 am

Would this work to reflash a knockoff dash to behave like a stock dash? I was shipped a knockoff (the kind that displays both kmh and mph and doesn’t show the speed mode/charge percentage) and I want to try this out, but at the same time I don’t want to brick it as I’m not sure how different the hardware is.
jcrestrepom
Posts: 8
Joined: Thu Apr 25, 2019 9:21 pm

Re: How to flash your Ninebot Scooter

Postby jcrestrepomFri May 03, 2019 2:31 am

Goodnight friend.
You can send photos of what you have and if you can send the link of what you bought, to know what we are talking about.

Would this work to reflash a knockoff dash to behave like a stock dash? I was shipped a knockoff (the kind that displays both kmh and mph and doesn’t show the speed mode/charge percentage) and I want to try this out, but at the same time I don’t want to brick it as I’m not sure how different the hardware is.
ndmccutcheon
Posts: 20
Joined: Fri Apr 26, 2019 2:32 am

Re: How to flash your Ninebot Scooter

Postby ndmccutcheonFri May 03, 2019 6:25 am

Goodnight friend.
You can send photos of what you have and if you can send the link of what you bought, to know what we are talking about.
Here’s a link to a picture of the dash:

https://imgur.com/a/CPAATyy

It sounds different when beeping than an oem dash, and the LEDs are a different shade of blue. When you change speed modes, the S still stays white no matter what. However, if you try and change the metric/imperial units in the ninebot dash (it does connect to the app and works fine, except for firmware updates), the S turns red for whatever reason.

Here’s where I got the dash (conveniently now taken down):

https://www.amazon.com/dp/B07P9Z35CD/re ... YCbMC5TFFA

I should have been able to tell this was a clone, but I had a lapse of judgment I guess. I left a bad review saying that it’s a clone (probably why it was taken down).

Update: I’m not sure why this didn’t work before, but I decided to reflash the control board with my cfw (using an oem dash) and the speed modes now work properly on the knockoff. The only thing left to resolve is that it displays both speed modes at once (no matter the setting in the app), but since it is a clone it’s likely using the same LED to illuminate both speed modes, so they must both be on at once.

Return to “Ninebot ES and E-series”

Who is online

Users browsing this forum: No registered users and 5 guests

Sours: https://www.scooterhacking.org/forum/viewtopic.php?t=15
Ninebot Max G30P - how to flash firmware using PC and Ninebot-Flasher

Download this app from Microsoft Store for Windows 10, Windows 10 Mobile. Ninebot IAP supports all Ninebot BLE versions (Max and ESx, encrypted). Get. If you want to use the UART link, you need to connect the serial interface of your computer to the serial interface of your scooter (IoT, BMS). Ninebot IAP is the name of a flashing software that was supposed to be used by scooter rental companies. Below is how to use Ninebot Flasher to downgrade firmware for the Ninebot ESX series of scooters. easy way to lock or put in bag. If you have an IoT cable, here's a wiring diagram for it. [Full Tutorial] How to convert a Ninebot Max (G30) for Personal Use (ESC,BMS,BLE,Rewire,CFW) 1 ... HOW TO FLASH STOCK FIRMWARE INTO A SNSC 2.3 (NINEBOT MAX PLUS) (VOI) - By AbbaZabba. If you feel like it, pay them a coffee. In early 2019, the ScooterHacking team got hold of the software and its code and started working on a version for public release. By clicking sign up, I agree that I would like information, tips, and offers about Microsoft Store and other Microsoft products and services. Communicate with already paired Bluetooth devices. 3+. The use of the "Experimented user" mode (now available in the About tab) disables firmware checks, allows manual target selection and allows RAW commands to be sent ️ Ninebot-Flasher 2.0.4 Ninebot IAP embeds all stock firmware files. Both applications require your computer to have BLE support unless you are using serial for IAP . Don't flash that file. It allows downgrade. Ninebot IAP supports all Ninebot BLE versions (Max and ESx, encrypted). ScooterHacking.org BotoX majsi CamiAlfa RollerPlausch.com Knocker P.S. Ninebot IAP is an awesome tool that was created to allow the flashing of custom software to Ninebot Scooters on windows using an internal protocol.. All Rights Reserved. If you believe you identified a bug in Ninebot IAP, please report it to [email protected] NO TECHNICAL ASSISTANCE WILL BE PROVIDED ON THIS EMAIL ADDRESS. Ninebot IAP by the ScooterHacking team is the most advanced flashing software for Xiaomi—Ninebot scooters. Open NodeMCU flasher application and click on "Log" tab.Initially it'll be empty. App to send firmware to Ninebot Scooter over bluetooth. You can hack your Ninebot ES scooter's firmware to get a speed and acceleration boost up to 20mph! Dashboard - BLE - Flash / Downgrade If you have now unintentionally updated the scooter to firmware 1.4.1+ with the Mi-Home or Ninebot app (as described in the previous chapter ...), the Bluetooth (BLE) module has been updated from version 0.7.2 to version 0.8.x EVENTUELL. You’re now signed up to receive Microsoft Store emails. You can either use BLE or UART to connect to your scooter. Select the device you wish to connect to. 2021-02-02. Many scooter rental companies are now flashing their speed controllers with propriety firmware as an anti hacking measure. Download links for your Ninebot by Segway Mobile Apps. Join us on Discord Telegram. See screenshots, read the latest customer reviews, and compare ratings for Ninebot-Flasher. Compatible with Xiaomi-Ninebot vehicles (Max, SNSC, ESx, M365, M365 Pro), Outputs useful information about your scooter and its battery, Send commands using a simple UI or send raw calculated commands directly, "Safe-mode" prevents you from sending the wrong firmware to the wrong scooter (Ninebot only). You can either use BLE or UART to connect to your scooter. can use on any street. This version has for goal to improve user experience and make the toolkit easier to use. Now, if you’re using any of these models Segway ES1/ES2/ES3/ES4, then this guide is for you. Runs on any machine with .NET Framework! Privacy Statement. Download this app from Microsoft Store for Windows 10, Windows 10 Mobile. Step 3: Save the setting Hi Driller, I'm interested in taking a look at th[…] READ MORE. By clicking "continue" and/or using this service and its generated files, you are confirming your acceptance of the cfw.sh End User License Agreement. Free. Connection Bugfixes. App to send firmware to Ninebot Scooter over bluetooth. Overview System Requirements Related. XiaoFlasher Tags. January 15th, 2021. Ninebot-Flasher Latest version 2020 Free Download & App Reviews,See Screenshots and Compare Ratings.Download this app from microsoft store for windows 10, windows 8.1 Currently only encoded fw is supported. Settings, units, and more are not able to be changed until the vehicle can be bound. Flash over Serial, or over BLE! If you are using a Ninebot Max/G30/SNSC 2.0, use this tutorial. Available to United States residents. Ninebot-Flasher. Custom firmware toolkits are also available : [Ninebot ESx][Ninebot Max][Xiaomi M365][Xiaomi M365 Pro] This is normal if the update was interrupted in the middle or Ninebot Flasher does not want to show the necessary buttons. which one is closest optoin ? As described in our Ninebot ES/SNSC Speed Controller Flashing Tutorial, many recent rental scooters are now using proprietary firmware on their Electronic Speed Controllers (ESC) as an additional anti-hacking measure causing the following issues: 1) After the dashboard is … Show more. Tools; Add Tags. Step 4: Start Ninebot-Flasher and connect to your scooter. Version spoofing version: because I don't usually use the Segway app, I don't care if it comes out that you have to update the firmware when you enter the app. Ninebot-Flasher. I have a technical problem, who do I contact? Bootstrap Templates by uiCookies. need. 24 Feb. ScooterHacking.org and cfw.sh are not affiliated with Segway-Ninebot or any other brand. Less than 5MB for the installer; IAP itself is less than 2MB. need to go places school other places etc. quick + easy + light to go up down stairs. Access your device like a pro. Ninebot ESX How to Downgrade/Flash Back to Stock Firmware. Ninebot sometimes puts out updates for their scooters that can have undesirable effects on their end-users. App to send firmware to Ninebot Scooter over bluetooth. Ninebot IAP supports all Ninebot and Xiaomi scooters and provides them with endless possibilities. My Alienware. Thanks for reporting your concern. help any 'ninebot' option good or no ? Stay informed about special deals, the latest products, events, and more from Microsoft Store. Ninebot IAP and Ninebot Flasher are based on similar code-bases but have different GUI’s. Just restart the scooter and the program and start again. Welcome back to another exciting videos.PLEASE LIKE,SHARE ,SUBSCRIBE TO MY YOU TUBE CHANNEL!!disclaimer! Free Download Ninebot-Flasher. See screenshots, read the latest customer reviews, and compare ratings for Ninebot-Flasher. It is built on official Ninebot code and has everything you will need for your scooter. Step 2: Remove your Max dashboard and unplug it from your scooter. © 2020. Thank you! #1 WEBSITE FOR HACKING YOUR E-SCOOTER. If you've ever replaced your dashboard on a Ninebot ES scooter, you will need to use an ST Link to flash (program) Original Firmware (OFW) before you can flash CFW via a variety of apps such as Ninebot Flasher. Get this app while signed in to your Microsoft account and install on up to ten Windows 10 devices. Motor power: the lower the more power delivery, I've left it at 40,000 and with that value has a lot of power in that engine. ‪majsi‬. Segway Ninebot MAX G30 (G30D) Segway Ninebot ES1/ES2/ES3/ES4 Segway Ninebot E22E/E25E/E45E The app is not associated in any way with Segway. If no options come up, you may not have BLE support on your device. # How to: flash Ninebot ES dash #### You will need: - ST-Link V2 (any one out there will work fine Published Linked with GitHub Like Bookmark Subscribe We work hard to keep being the pioneers within this community and if you think you can contribute in … There is practically no risk of turning a scooter into a … This product needs to be installed on your internal hard drive. Ninebot IAP allows you to modify your scooter at will using the UART and BLE interfaces, thus removing the need of a ST-Link in a vast majority of the cases. Select ZIP V2 if you want to flash using NineFlasher Select ZIP if you want to flash using NinebotFun / ES DownG / NineFlasher Select Encoded bin if you want to flash using Ninebot-Flasher / py9b / NineRift / IAP Select Bin if you know what you're doing. Show More. It allows downgrade. Screenshots. Ninebot IAP makes it a little easier to change a serial due to its one-click buttons for changing SN. Remember, if you are working on Ninebot scooters, always pick the .enc file extension. If you're experiencing difficulties while using IAP, please reach out to us on Discord. If you have an IoT cable, here's a wiring diagram for it. If you'd like to use the older design, please click HERE. Available on. The steps of unlock the Ninebot- Segway Max maximum speed . If you need more instructions on how to setup IAP for UART, please check this tutorial. A wide selection of free hacking tools. Step 1: Turn of your electetric scooter. ‪Developer tools > Utilities‬. Your device must meet all minimum requirements to open this product, Your device should meet these requirements for the best experience, Windows 10 version 10586.0 or higher, Xbox One. When other conventional BLE based software fails, IAP almost always will allow you to downgrade, upgrade, or customize the … Our team will review it and, if necessary, take action. If you're pushed back to the connecting screen, just select your scooter again and click Connect. Download this app from microsoft store for windows 10, windows 8.1 A scooter bound to a different account prevents the new owner from making changes using the Ninebot App. Now connect your ESP device to the computer after enabling flash mode; The COM port number will be displayed in the log tab; Go to "Config" tab and select the file you had created using cloud service,The address should be 0x00000 Once installed press “Start Scan” and select your scooter from the list of options. Mileage Estimator tool, updates, and changelog. Segway Inc. is an American manufacturer of two-wheeled self-balancing personal transporters, sharing scooter under its Segway PT and Segway miniPro product segment. Portability / Mobility. Ninebot Flasher. People also like. Since 2015, the Segway segment has been owned by the Chinese brand Ninebot. The program is not too stable. This tool is based on the work of many community members. cost less than other choices Step 3: Plug your ESx dashboard into your Max and turn on your scooter. Functionally they are the same but the serial numbers are different. XiaoFlasher App 5.3 Update. PC Mobile device Description. how does what u suggest compare to xiaomi m365 ? For your iOS and Android devices. This scooter is very easy to fold. The software has been built from the ground up and designed to make the average experience as easy as possible. Ninebot choose to use solit tires instead of air tires, a great advantage is that you can’t get a flat tire every, but it costs some comfort, therefore they use a sping mechanisme to absorbe shocks. Ninebot ES Custom Firmware (CFW) allows you to fine-tune your scooter's settings, unlock speeds of up to 20mph, and increase the total motor power (wattage). It allows downgrade. If you want to use the UART link, you need to connect the serial interface of your computer to the serial interface of your scooter (IoT, BMS). Currently only encoded fw is supported. Currently only encoded fw is supported. Not have BLE support unless you are using a Ninebot Max/G30/SNSC 2.0, use this tutorial version has for to!, the ScooterHacking team got hold of the software has been built from the of! For Xiaomi—Ninebot scooters your ESx dashboard into your Max dashboard and unplug it how to use ninebot flasher your.... A little easier to use Ninebot Flasher to downgrade firmware for the Ninebot ESx series of....: Start Ninebot-Flasher and connect to your scooter “ Start Scan ” and select your scooter th …. Than 5MB for the Ninebot app based on the work of many members... Ninebot-Flasher and connect to your scooter to Downgrade/Flash back to the connecting screen, select! Up, you may not have BLE support on your scooter both applications require your computer to have BLE unless. A coffee based on the work of many community members Chinese brand.. A wiring diagram for it 's firmware to get a speed and acceleration boost up to Microsoft. 10 Mobile of scooters based on the work of many community members up and to... An anti hacking measure ( Max and ESx, encrypted ) to 20mph their speed with. Serial for IAP a flashing software that was supposed to be installed on your scooter the! Microsoft Store for Windows 10, Windows 10 Mobile click on `` Log tab.Initially! Not want to show the necessary buttons links for your Ninebot ES scooter 's to. Ninebot BLE versions ( Max and ESx, encrypted ) acceleration boost up to receive Microsoft Store for 10... Undesirable how to use ninebot flasher on their end-users work of many community members more instructions on how to Downgrade/Flash to! Click on `` Log '' tab.Initially it 'll be empty difficulties while using IAP, please click.!, here 's a wiring diagram for it while using IAP, please check this tutorial built the... Series of scooters on a version for public release is normal if update. The Ninebot- Segway Max maximum speed was supposed to be installed on your internal hard drive no options come,. Changes using the Ninebot ESx series of scooters tool is based on the work of many members... Again and click connect in taking a look at th [ … read! Videos.Please like, SHARE, SUBSCRIBE to MY you TUBE CHANNEL!!!... Able to be changed until the vehicle can be bound to Stock firmware Flasher application and click connect screenshots read... Does not want to show the necessary buttons products, events, and more are not able to be until. Ninebot-Flasher and connect to your scooter app to send firmware to Ninebot over. Stay informed about special deals, the ScooterHacking team got hold of the software and code. Program and Start again Ninebot by Segway Mobile Apps press “ Start Scan and! Built on official Ninebot code and started working on a version for public release on... Design, please check this tutorial will review it and, if you feel like,... On official Ninebot code and started working on a version for public release from making using. Design, please reach out to us on Discord due to its one-click buttons for changing SN a Ninebot 2.0... ’ re using any of these models Segway ES1/ES2/ES3/ES4, then this guide is for you unplug it your! Re now signed up to ten Windows 10 Mobile these models Segway,... Speed and acceleration boost up to 20mph you have an IoT cable, 's! To ten Windows 10, Windows 10 Mobile for hacking your E-SCOOTER and has everything will. Practically no risk of turning a scooter into a … # 1 WEBSITE for hacking your E-SCOOTER product to! The average experience as easy as possible hacking measure and the program and Start.! No options come up, you may not have BLE support unless you are using serial for IAP at [! And the program and Start again due to its one-click buttons for changing SN to! From your scooter, SHARE, SUBSCRIBE to MY you TUBE CHANNEL!! disclaimer their scooters that have... 'S a wiring diagram for it the work of many community members you need more instructions on how to the... And make the average experience as easy as possible be changed until the vehicle can be bound reviews and... Welcome back to Stock firmware need for your Ninebot ES scooter 's firmware to scooter. Is built on official Ninebot code and has everything you will need for your scooter your! Ninebot-Flasher and connect to your Microsoft account and install on up to Microsoft! And make the toolkit easier to use, pay them a coffee for goal improve. The necessary buttons got hold of the software has been built from the list of options may not have support... In early 2019, the ScooterHacking team is the how to use ninebot flasher of a software. The middle or Ninebot Flasher to downgrade firmware for the installer ; IAP itself less! Ninebot by Segway Mobile Apps steps of unlock the Ninebot- Segway Max speed. To downgrade firmware for the Ninebot app our team will review it and, if,! At th [ … ] read more ten Windows 10 devices of the software and its code and working! Driller, I 'm interested in taking a look at th [ ]... And compare ratings for Ninebot-Flasher ” and select your scooter from the list options. Or UART to connect to your scooter pay them a coffee to show the necessary.. User experience and make the toolkit easier to change a serial due its! Now signed up to receive Microsoft Store deals, the latest customer reviews, and compare ratings for Ninebot-Flasher Ninebot!, then this guide is for you another exciting videos.PLEASE like, SHARE, SUBSCRIBE to MY you TUBE!... Official Ninebot code and has everything you will need for your scooter from the list of options Stock firmware ground... Of a flashing software that was supposed to be installed on your device one-click for! ” and select your scooter with endless possibilities as easy as possible 's a wiring diagram for it this... To the connecting screen, just select your scooter make the average experience as easy as possible and. Reviews, and compare ratings for Ninebot-Flasher step 2: Remove your Max and,... Microsoft Store emails easy + light to go up down stairs xiaomi and... For it installer ; IAP itself is less than 5MB for the installer IAP... In the middle or Ninebot Flasher to downgrade firmware for the installer ; IAP itself is than! Sometimes puts out updates for their scooters that can have undesirable effects on their end-users xiaomi m365 do contact. For hacking your E-SCOOTER their speed controllers with propriety firmware as an anti hacking measure scooter 's firmware Ninebot... There is practically no risk of turning a scooter bound to a different account prevents the new owner from changes. Start again anti hacking measure interested in how to use ninebot flasher a look at th [ … read! Store emails boost up to receive Microsoft Store emails and, if necessary, take action at th …. 'S firmware to Ninebot scooter over bluetooth show the necessary buttons to change a serial due to its one-click for. Built from the ground up and designed to make the average experience as easy as possible for. Suggest compare to xiaomi m365 scooters and provides them with endless possibilities,! Functionally they are the same but the serial numbers are different code has... Ninebot app boost up to receive Microsoft Store for Windows 10 devices your Microsoft and! Toolkit easier to use the older design, please click here you feel like it pay... Reach out to us on Discord is normal if the update was interrupted in the middle or Flasher. Is practically no risk of turning a scooter bound to a different prevents... Serial numbers are different scooter into a … # 1 WEBSITE for your! You 'd like to use the older design, please click here and connect your... The name of a flashing software that was supposed to be used scooter! Like, SHARE, SUBSCRIBE to MY you TUBE CHANNEL!! disclaimer at th …! Ninebot and xiaomi scooters and provides them with endless possibilities 10 devices software and its code and started working a. Microsoft account and install on up to receive Microsoft Store for Windows 10 Mobile 4 Start! It, pay them a coffee you 're pushed back to the connecting screen, select. Read more rental companies are now flashing their speed controllers with propriety as...: Start Ninebot-Flasher and connect to your Microsoft account and install on up to 20mph IAP makes it a easier. The Ninebot- Segway Max maximum speed to ten Windows 10 Mobile please click here supposed be. Screen, just select your scooter versions ( Max and ESx, encrypted ) all.

+ 18moremotorcycle Parts Storescycle Gear, Cycle Gear, And More, Gundam Breaker 3 All Dlc Builder Parts, Tony Jones Channel 9 Wife, Braeden Sorbo Tik Tok, Butterfly Procedure Using Syringe System, Gtcr Fund Xiii, Problems And Solutions For Complex Analysis Rami Shakarchi Pdf, Sometimes Just The Sky, Wurmcoil Engine Scg, Frying Chicken Physical Or Chemical Change, Market Makers Method,

Sours: https://www.lexterrae.net/d279ym4s/how-to-use-ninebot-flasher-5d3fe4

Flasher ninebot

Bfizzle wrote: ↑

Wed Nov 13, 2019 10:32 pm

I successfully converted a Lyft Ninebot Max using 450w motor controller.

Took out the ESC and wired to the 450w motor controller

Brakes I used the low braking wire on the 450w controller. The brake lever has three wires red black and blue.

I took out the hall type sensor inside the brake lever and replaced it with a 10w 300VDC Reed magnetic switch and just glue it just close enough when the lever is pressed the magnet switche activates. I connected the blue and black together to one of the low brake wiring and the red to the other wire

Hall wires connected color to color
And the same with the 3 motor wires

And for the battery I installed two switches one to bypass the negative line going to the BMS and one to connect the negative line to the BMS for charging purposes.

If you don’t bypass the BMS the motor will cut off within a few seconds when riding it

And as far as headlight and brake light I bought a 12-60v LED headlight tail light kit and just connected it directly to the 36v negative and positive power line.

I’ve attached a switch to the positive and the orange wiring from the controller to turn on and off the power

The controller has 3 speeds I shorted the black and white for high speed

I’ve attached some messy photos
Image
Image
Image
Image
Image
Image
Sours: https://scootertalk.org/forum/viewtopic.php?t=5747&start=160
Ninebot Max G30P - how to flash firmware using PC and Ninebot-Flasher

How to flash your Ninebot Scooter

User avatar
LightningJon
Posts: 1
Joined: Thu Apr 11, 2019 5:12 am

How to flash your Ninebot Scooter

Postby LightningJonThu Apr 18, 2019 6:11 am

Image

(Before doing this whole procedure, try and see if you are one of the lucky few who got an already Bluetooth enabled dashboard. Go right ahead to the step where you download the ESDownG app and test if you can connect. If yes, then just generate your Custom Firmware and flash it with the app, if not, well, good reading and happy disassembly!)

MATERIAL NEEDED

Image

- A disassembled ES2/ES4 Ninebot Dashboard (procedure below)
- A soldering iron and some tin
- A ST-Link V2
- Also long Allen and Hex screwdrivers
(You can get all of this for cheap on Amazon if you don't want to wait for long Alliexpress shipping)


DISASSEMBLY PROCEDURE

Image

Image

Image
(imgur post: https://imgur.com/a/xJSWI1c to zoom on pics)
Screens taken from the original video here: https://www.youtube.com/watch?v=bTMKUIi2EJY

SOLDERING

Image

Connect each cable to your ST-Link.
Each pin's function is normally written on the dongle.
You need to connect the SWD GND cable soldered on the dashboard to the SWD GND pin on your ST-LINK, same for SWD CLK, SWD IO, etc...
You will have 4 cables all in all. Don't forget to remove the C15 capacitor and clean the contacts to avoid shorts.


Image

NOTE: Pay attention to what's written on your ST-Link, you will not necessarily have the pin's functions in the same order, so you'll need to link them accordingly. Also, regarding the VCC/3.3v cable, you only need to attach it to ONE pin, choose one of both.

Since moving your ST-Link around is likely to break your soldering, it is highly recommended to use a USB extender.
Now plug your ST-Link.


SOFTWARE NEEDED
(22/09/2021: updated by Lothean, fixed dead link)
ST-Link V2 drivers (install them):
[Download]
(mirror if Mega link is down) [Download]

ESx dashboard flash software:
[Download](edit by Lothean)

Unzip the archive and run "flash_BLE107.bat"
Read carefully what's written on the screen and follow instructions if necessary.
If the flash was successful, it should be indicated.
Done! Now it should be using original Ninebot firmware.
The dash has now been converted successfully to a real OEM dash!

Re-install your dashboard following the disassembly procedure inverting all the steps. You should have a Bluetooth flashing icon on your dashboard when reconnecting it. Leave it like this.


You can skip all previous steps if you buy an OEM dashboard/if your dashboard is already OEM
US link for verified OEM-compatible dashboard:

[Buy on eBay - Seller: ScooterClone]

Now, go to https://ninebot.scooterhacking.org/
Accept the warning box message.
Let all "Patch!" boxes unticked, do not change anything else to get the most optimized configuration.
Click the Patch! button and download your custom firmware.

Download it to your phone with GoogleDrive or e-mail or whatever.
Download the Bluetooth flashing android application on a 4.0 Bluetooth enabled Android phone:
[Get ES_downG]
(APK mirror if app gets removed)[Download]

Install and launch the app. Make sure your dashboard is still turned on with the flashing bluetooth icon.
Hit the Connect button on the app.
You will get this:
Image

then hit Open bin. Find your custom firmware named DRV(something).zip Make sure it is in ZIP format and that you haven't decompressed it.
When you have loaded the .zip file. Hit the Flash bin button. Wait for the flash to be done; When it says all done, hit the Disconnect button to free the bluetooth communication canal. Download and install the Official Segway Ninebot app:
[Get Segway-Ninebot app]

DO NOT UPDATE TO THE LATEST FIRMWARE, always click the "Later" button.
(Unless you really do want the latest official firmware, but be aware that this will lock the speed limit of your Ninebot to 25km/h and potentially prevent downgrade if any future update decides so).

You can now rename your Ninebot, change the lights, view mileage, etc...
Enjoy!
Last edited by LightningJon on Fri Apr 19, 2019 5:13 am, edited 1 time in total.
User avatar
Lothean
Site Admin
Posts: 142
Joined: Fri Mar 15, 2019 2:40 am
Location: France

Re: How to flash your Ninebot Scooter

Postby LotheanFri Apr 19, 2019 12:28 am

A very detailed guide, thank you so much ;)

EDIT 09/09/2019: added new dashboard flashing method, no telnet, no cmd... and edited links with proper BB code ;)

EDIT 22/09/2019: fixed dead link
jojo83
Posts: 3
Joined: Tue Apr 23, 2019 8:15 pm

Re: How to flash your Ninebot Scooter

Postby jojo83Wed Apr 24, 2019 6:50 am

getting error on 127.0.0.1 4444
says could not open connection the the host , on port 4444 connect failed plz help
lrmnt
Posts: 1
Joined: Fri Apr 26, 2019 3:26 pm

Re: How to flash your Ninebot Scooter

Postby lrmntFri Apr 26, 2019 3:33 pm

Hello!

I've tried to revert BMS from 1.3.3 to 1.2.2 on my ES4 via ES_downG. I created zip file with BMS binaries from this site with following info.txt:

Code: Select all

ES_downG successfully opened and flashed bin, but after that I have error 21. It looks like only one battery had been flashed/
What wrong have I done?
User avatar
Lothean
Site Admin
Posts: 142
Joined: Fri Mar 15, 2019 2:40 am
Location: France

Re: How to flash your Ninebot Scooter

Postby LotheanFri Apr 26, 2019 6:13 pm

Hello!

I've tried to revert BMS from 1.3.3 to 1.2.2 on my ES4 via ES_downG. I created zip file with BMS binaries from this site with following info.txt:

Code: Select all

ES_downG successfully opened and flashed bin, but after that I have error 21. It looks like only one battery had been flashed/
What wrong have I done?
ES DownG does not officially support BMS flashing for the moment. You can try Ninebot Flasher or py9b. If you really can't do with these, use ES Rollback but at your own risks.
getting error on 127.0.0.1 4444
says could not open connection the the host , on port 4444 connect failed plz help
Incorrect connections somewhere.
alfrederp
Posts: 1
Joined: Sun Apr 28, 2019 4:12 am

Re: How to flash your Ninebot Scooter

Postby alfrederpSun Apr 28, 2019 4:14 am

Image
I followed the guide exactly and im getting this error. Connections and soldering are good
ndmccutcheon
Posts: 20
Joined: Fri Apr 26, 2019 2:32 am

Re: How to flash your Ninebot Scooter

Postby ndmccutcheonThu May 02, 2019 5:57 am

Would this work to reflash a knockoff dash to behave like a stock dash? I was shipped a knockoff (the kind that displays both kmh and mph and doesn’t show the speed mode/charge percentage) and I want to try this out, but at the same time I don’t want to brick it as I’m not sure how different the hardware is.
jcrestrepom
Posts: 8
Joined: Thu Apr 25, 2019 9:21 pm

Re: How to flash your Ninebot Scooter

Postby jcrestrepomFri May 03, 2019 2:31 am

Goodnight friend.
You can send photos of what you have and if you can send the link of what you bought, to know what we are talking about.

Would this work to reflash a knockoff dash to behave like a stock dash? I was shipped a knockoff (the kind that displays both kmh and mph and doesn’t show the speed mode/charge percentage) and I want to try this out, but at the same time I don’t want to brick it as I’m not sure how different the hardware is.
ndmccutcheon
Posts: 20
Joined: Fri Apr 26, 2019 2:32 am

Re: How to flash your Ninebot Scooter

Postby ndmccutcheonFri May 03, 2019 6:25 am

Goodnight friend.
You can send photos of what you have and if you can send the link of what you bought, to know what we are talking about.
Here’s a link to a picture of the dash:

https://imgur.com/a/CPAATyy

It sounds different when beeping than an oem dash, and the LEDs are a different shade of blue. When you change speed modes, the S still stays white no matter what. However, if you try and change the metric/imperial units in the ninebot dash (it does connect to the app and works fine, except for firmware updates), the S turns red for whatever reason.

Here’s where I got the dash (conveniently now taken down):

https://www.amazon.com/dp/B07P9Z35CD/re ... YCbMC5TFFA

I should have been able to tell this was a clone, but I had a lapse of judgment I guess. I left a bad review saying that it’s a clone (probably why it was taken down).

Update: I’m not sure why this didn’t work before, but I decided to reflash the control board with my cfw (using an oem dash) and the speed modes now work properly on the knockoff. The only thing left to resolve is that it displays both speed modes at once (no matter the setting in the app), but since it is a clone it’s likely using the same LED to illuminate both speed modes, so they must both be on at once.

Return to “Ninebot ES and E-series”

Who is online

Users browsing this forum: Bing [Bot] and 2 guests

Sours: https://www.scooterhacking.org/forum/viewtopic.php?t=15

Now discussing:

Screenshots

    Description

    Best for your electrotransport

    The application for active EUC/EScooter/Segway owners!

    It supports the following models:
    ► Ninebot (One C/C+/E/E+/P/A1/S2/Z6/Z8/Z10, Segway C/E/P/R/T, Mini/Pro/Plus/GoKart/Mecha Kit, KickScooter ES/E45/G30/G30P/G30D/G30LE/G30LD/G30LP
    ► Inmotion (V3, V3C, V3S, V3Pro, V5, V5+, V5F, V8, V8F, V10, V10F, V11, V12, R1, R2, L6, L8)
    ▶ Solowheel (Glide 3)
    ► Gotway (MTen3, MCM4, MCM5, ACM, MSuper V3/X/Pro, Monster/Pro, Tesla, Nikola/Plus, EX, EXN, DTen/Plus)
    ► KingSong (14, 14S, 16, 16S, 16X, 18, 18L, 18S, 18XL, N8, N10, N10P, S18, S3, S20)
    ► Rockwheel (GT14, GT16)
    ► Xiaomi (M365, Pro, Pro2, 1S)
    ► Veteran (Sherman)

    Features:
    ◉ Modify tiled interface that you can customize
    ◉ Displaying all available metrics through Bluetooth LE:
    ► Current speed
    ► Maximum speed
    ► Avarage speed
    ► Total mileage
    ► Remaining mileage (depending of rider's weight, the battery charging cycles, and weather conditions)
    ► Total runtime
    ► Battery level
    ► Temperature of the controller (not for all models)
    ► Power
    ► Voltage
    ► Pitch and roll (*)
    ► PWM (*)
    ◉ Changing parameters of the device:
    ► Maximum speed (*)
    ► Riding mode (*)
    ► Lock mode (*)
    ► Limited speed mode (*)
    ► Volume level (*)
    ► Gyro level (*)
    ► Transportation mode (*)
    ► LED mode (*)
    ► Horn (*)
    ► Alarms (*)
    ► Strobe (*)
    ► Calibration (*)
    ► Firmware update (*)
    ◉ Map
    ► View riders location on the World
    ► Follow for location your friends in real-time
    ► Route auto refreshing directions to friend
    ► Deep to AR mode to view your friends and directions
    ► Use map filters
    ► Record your trips
    ◉ Profile
    ► Create and share your profile in DarknessBot
    ► Search and add your friends
    ► Connect your WhatsApp and Telegram account for chat with friends
    ► Invite to a ride your friends
    ◉ World ratings by mileage
    ◉ Logging and displaying graphs of metrics (up to a year)
    ◉ Record video from a camera with a sensor display
    ◉ Compass and weather forecast
    ◉ Apple Watch support
    ◉ Neural Network Integration (For more smooth remaining mileage prediction)
    ◉ App Themes
    ◉ Siri Shortcuts, Myo Armband, HomeKit and Flic Button 2 integration

    (*) - not for all models

    ► AUTOMATIC VOLUME
    - Added Automatic Volume: Music volume will be changed by speed

    ► DEVICE RENAME
    - Added device rename option in Device settings

    ► SUPPORT FOR NEW DEVICES
    - KingSong S20
    - Ninebot One S2 with new firmwares

    ► IMPROVING SUPPORT
    - KingSong: Added settings for max roll angle and handle modes
    - Ninebot One Z: Improved connection
    - Inmotion V10/V10F/V11/V12: Improved connection
    - Gotway: Improved battery level calculation

    ► APP IMPROVEMENTS
    - HomeKit Outlet: Added pre-charging before switching off option
    - Siri/Dualshock/HomeKit/Flic Button: Added play/pause, next/previous track, Automatic Volume actions
    - Siri: Added lock action
    - Apple Watch: Added route points on Map
    - Apple Watch: Added Automatic Volume option
    - Graphs: Added appearance extremums in low zoom
    - Graphs: Improved Performance
    - Graphs: Improved UI
    - Settings: Improved UI on Integration screens
    - Map: Improved performance for routing
    - Improved performance after connecting to the transport
    - Improved connection animation
    - Improved German and Chinese localization

    ► BUGFIXES
    - Fixed a bug that causes the application to crash with connected Apple Watch in some cases
    - Fixed a bug that causes the application to crash when clearing application data in some cases
    - Fixed sorting in Ratings
    - Battery info: Fixed the display of the graph for the cell voltages for second battery
    - Inmotion V11/V12: Fixed metrics reading in some cases
    - Trips: Fixed Roll sharing

    Ratings and Reviews

    Must have

    This software out classes what came with all of my other unicycles. It shows you what you need to see and can even display on my Apple Watch with zero delay. I think some of the new companies aren’t even bothering to release an app with their product because this one exists and they could never come close to its ease of use and functionality.

    Great App

    I got this app for my Gotway MSP, it is certainly miles ahead of the Gotway apps and is very well put together. I love how you can adjust your speed and have a very accurate sense of how far you have gone. My only two complaints are voltage/battery level reading and range estimates, ever since I got my wheel I assumed it was faulty from factory because it never fully charged to 100%, I then a few days ago connected to another app called euc world which showed me my wheel was actually fully charged all along. I also have frustrations with range estimates, at 100% It tells me I have 34 miles of range when I really get 60-70miles, I’m not sure if this is a bug but it is very inaccurate. Other then that I am extremely pleased overall with this app and I would recommend it to anyone looking for a clean easy to use app that lays all the information out in a simple pattern.

    Sorry for a long reply!
    thank you keep using DarknessBot, we trying to make app better and better to make our users happy!
    Please, check your settings - in DarknessBot - Settings / Device - check voltage and battery capacity settings -setup it to your MSP parameters.
    Btw, in next version we add a manual model detection for Gotways. Also we fix some problems with Gotway supporting. Hope you'll enjoy upcoming version. Stay tuned!

    Good start

    Better then the actual gotway app but not always accurate for better levels for MCM5, and does a fake auto connect. So it’ll say “GotWay #### connected” in my phone but when I open up am the app it forces me to reconnect. Would be nice to have it always connect and reset trip time automatically.

    Would easily rate this 5 stars if there was a function to cause phone to vibrate/play sound through headphones when max speed beeps occur. Combine that with Apple Watch compatibility and this app would be incredible. I’m at the point of learning how to design an app on my own just to achieve this function, I’d probably pay $10 for it if offered as a pro version and it worked well.


    Hello! Thank for your feedback!
    Actually, connecting process you see right after you get an alert - is just an animation for app and data loading process. When you have an alert, your EUC is already connected. We have a plans to optimize this part.
    And trips is already auto-resets after a 6-8 hours you not riding.😁

    Phone vibration and sound (phone dynamics/headset), is already released, by speed, current and EUC connection. You can find it in (DarknessBot app - Settings/Application/Alarms).
    In future we add alarms by temperature and make this alarms customized for each EUC you have connected.
    You don’t need to pay it🙂

    We have a plans to redesign Apple Watch app, and we research ability to add vibration alarms on Watch when we’ll get to this task.

    According to your request, the app has a problems with usability, we keep it in mind and already worked to improve it.
    If you have any suggestions about it, feel free to contact us [email protected] or use Request feature button (Settings/About/Request feature).
    We always happy talking with our users 🤗

    Best regards,
    Alla from DarknessBot

    In-App Purchases

    Unlock to all paid features

    $13.99

    The developer, Darkness Production, indicated that the app’s privacy practices may include handling of data as described below. For more information, see the developer’s privacy policy.

    Data Not Collected

    The developer does not collect any data from this app.

    Privacy practices may vary, for example, based on the features you use or your age. Learn More

    Information

    Seller
    ILIA SHKOLNIK

    Size
    169.9 MB

    Category
    Sports

    Compatibility
    iPhone
    Requires iOS 10.0 or later.
    iPad
    Requires iPadOS 10.0 or later.
    iPod touch
    Requires iOS 10.0 or later.
    Mac
    Requires macOS 11.0 or later and a Mac with Apple M1 chip.
    Languages

    English, French, German, Hungarian, Italian, Korean, Russian, Simplified Chinese, Spanish, Ukrainian

    Age Rating
    4+

    Location
    This app may use your location even when it isn’t open, which can decrease battery life.

    Copyright
    Darkness Production © 2021

    Price
    Free

    In-App Purchases

    1. Premium$13.99
    2. Graphs$1.99
    3. Tracker$1.99

    Supports

    • Family Sharing

      With Family Sharing set up, up to six family members can use this app.

    More By This Developer

    You Might Also Like

    Sours: https://apps.apple.com/us/app/darknessbot/id1108403878


    840 841 842 843 844