Metal toe plates

Metal toe plates DEFAULT

Flush Metal Toe Taps For Leather Sole Dress Shoes

Flush Metal Toe Taps Detail

Buy the same high-quality Lulu flush metal toe taps used by many renowned bespoke and benchmade shoemakers from around the world. From the United Kingdom's John Lobb to Japan's Yohei Fukuda and more.

  • Greatly extends the life of your dress shoe's leather sole between resolings
  • Inaudible when installed sunken in or indented into the leather sole and flush with the sole's edges
  • Compatible with most handwelted, goodyear welted, and blake-rapid constructed shoes with leather soles
  • Available in a wide variety of sizes from Small to XXL (see photos for exact dimensions)
  • Includes required brass slotted screws for installation
  • Made in France

Sold in pairs. Professional cobbler installation highly recommended. Also known as French tip or toe taps.
Metal toe tap installation should be done flush, sunken, or indented into the sole.


The main area of wear for most shoes is the toe. With this in mind, by fitting Flush-mounted Toe Plates, you increase the wear of your leather sole threefold. Additionally, because they are flush-mounted they make minimal to no noise.

With the interplay of leather, steel, and brass, these toe plates give a refined look to any shoe. They are best installed on Goodyear welted shoes and careful attention is paid to retain the integrity of the welt stitches. Specially imported brass screws are used in the installation of the flush-mounted toe plates. They screw into the leather, but unlike steel screws, they don’t rust and rot out the leather. Having toe plates installed ensures the longevity of your investment on Goodyear Welted Shoes. It is a discreet option that doesn’t mar the look of the shoe.

The Baxter & Black Process

  1. To start, we select the right sized toe plate for the toe shape of the shoe/boot
  2. After this, we mark out our graft line and cut the line with our shoe knife
  3. We pare away the leather so that the metal toe plate sits flush with the sole of the shoe.
  4. We glue the leather and the toe plate and then fit the toe plate and let dry.
  5. Once dry and fitted correctly in place we use our scratch awl and make guide holes for the brass screws down the holes in the toe plate into the leather.
  6. With the guide holes being done we screw the brass screws into the leather to secure the toe plate to the shoe.
  7. The edge of the toe plate is then shaped to the same contour as the leather sole. Finally, it is inked so that the leather sole edge is smooth and the flush-mounted toe plate has no knicks in it.

The technical stuff

The Baxter & Black difference…

By using glues that seal the leather and metal surfaces and by using brass nails, we reduce the possibility of rust and rot under the flush mounted toe plate.

  1. Razor scooter charger
  2. Aphmau aaron lycan
  3. Premier baseball tournaments
  4. Pink furry art

The Importance of Toe Taps

The Importance of Toe Taps

Growing up in America and selling shoes at Nordstrom, I never really understood what toe taps where all about. I had seen the ones that are simply nailed on and look like little boomerang’s (you know the ones you can easily kick off and are pretty much worthless? Yea those ones!), but had never seen anyone with a pair of proper toe taps on. Occasionally I had seen (or better yet heard) the few people –who for some reason I don’t understand– wear heel plates (with as fast as you can replace a heel’s top piece those outdated loud bits don’t make any sense in this day and age). Like anything, most things in the sartorial world are lacking in America for two reasons; 1. Availability and 2. Lack of education. Maybe it’s changed now, but I bet that there are few cobblers in the US who can install a pair proper toe taps, for that matter you don’t find many here in England neither, whereas in France and Switzerland it’s like second nature. So it’s not just the US in this case, but a worldwide issue: understanding the importance toe taps play in maintaining the integrity of your sole’s toe region.

The Importance of Toe TapsThe Importance of Toe Taps

The Importance of Toe Taps

How Indented Toe Taps Benefit?

The natural way we walk as humans automatically harms our toe’s region due to our weight/gravity and the spring we put on every step in order to make the next one. And that constant grinding on the pavement wears down the sole in that area, especially if you are a hard walker like I am. That being, if you wear welted shoes, you could easily chew through the sole and start grinding down your welt. And the problem with that scenario is that while we can always get re-soles, most people cannot replace a welt as you basically have to make a new shoe. Therefore if you ruin your welt, your ruin your shoe. And that is on welted shoes not to mention blake stitched ones where you basically start chewing into the leather of the upper which is even worse and irreparable.

A lot of times too, if you do not put on toe taps it can lead to premature resoling as you get down to the welt but still have a lot of life left in the actual sole and if you do nothing you run the risk of starting to damage the welt. So that initial protection can ultimately double the life of your sole in reality.

On a more aesthetic note, it just looks bad when the front of your shoes are all chewed up and more than half worn down and all the edging dye worn off. That is a rookie mistake and look. When wearing nice shoes your toes are the bits that everyone looks at and appreciates and maintaining that region not only shows how much you appreciate your shoes but also how aware of a person you are, which can speak highly of yourself in a non verbal way.

The Importance of Toe Taps
The Importance of Toe Taps


Protecting a Closed Channel with Indented Toe Taps

In the upper echelons of welted shoe brands, you find that all of them offer a closed channel sole. For those of you that don’t know what that means, well basically when the sole is stitched on, you can do it two ways: 1. Showing the stitch (open channel) or 2. Hiding the stitch (closed channel). While the closed channel sole is a sign of quality shoes, it does have one flaw. You see, in order to close the channel, you have to cut into the sole to make a very thin flap (see pics) that then lifts up to allow you to sew the sole on. Once sewn, you then close that flap down to thus ‘hide’ the channel stitch. But you see, closing that flap is done with shoe glue/cement etc which is not indestructible and can be reopened over time, particularly in wet environments as water is one of the elements that breaks down glue’s holding components. The channel often starts to lift at the toes and works its way down. So getting toe taps actually helps to prevent that from the very get go.

The Importance of Toe Taps

The Importance of Toe Taps

Common Misconceptions About Toe Taps

1. They make noise

— This is actually not true at all. Heel taps make noise and a lot of it. Toe taps really don’t make any, unless you start tap dancing with them. But walking like a normal human being you would be surprise to ever hear them striking the pavement. The one exception might be marble flooring, but the noise would still be minimal.

2. They scratch floors

— Yes and no. On most floors they won’t providing that they were affixed properly. You see, they need to be properly sunken in and sanded down so that no sharp edges are sticking out, which will indeed scratch floors and other things for that matter. But that is down to the person that affixed them. If put on properly, the only floor they would/can scratch again is marble flooring. All else is quite safe.

3. They can harm my welt/channel stitch

— Again this is down to the person putting them on. Yes, if the cobbler/shoemaker does a sloppy job and cuts too deep into the sole, then yes, it can expose the welt and/or channel stitching. Again goes for screws that are too long. But providing the cobbler/shoemaker knows what he/she is doing, then this is a non-issue.

4. Once I have worn the shoes, I cannot have toe taps installed?

— No, actually a good cobbler can build up your sole with leather and add them after the fact. But it is best doing it on a brand new pair of shoes.


If you wear nice shoes, you need toe taps especially if you do any sort of walking on anything outside of carpet. Fair enough, if you go from front door of your house, to car in driveway/garage, to underground car park and then carpeted work place, you don’t need them. If you walk on pavement and suffer through rainy days, you need them. It’s that simple really. And you especially need them if you are a hard walker. Look at the picture below of my bespoke shoes that I have worn probably less than 20 times. You can see, that I even wear down the toe taps quite significantly. Imagine what I would do without them on?!

Places to Get Them Installed

— Many brands these days are offering them as adds on to your shoes when you buy them, such as J.FitzPatrick Footwear, Carmina, Gaziano & Girling, Vass and Saint Crispins.

— If you are London/UK based, you can get them installed at Tony’s Heel Bar in Crown Passage. Prices are ?30 per pair (with brass screws) and shipping to UK from ?8

— If you are New York City based, I believe that B.Nelson Shoe Repairs offers this service. Prices are $45 per pair (with brass screws) and shipping to US from $20

The Importance of Toe Taps

3 Ways To Prevent Your Shoes From Wearing Down

Then my husband left for the night shift, and my father-in-law took me and my one-year-old child home. The kid fell asleep on the road, the husband's father, of course, helped me to bring his grandson, but he was in no hurry. To leave us. After waiting for me to put the baby to bed, he pulled me into involuntary gatherings. His eloquence knew no bounds.

Plates metal toe

The ease with which she allowed a stranger to get to her secret place caused negative feelings in me. If only I fucked a little, for the sake of decency, before letting her cunt. She pretends to be a shy woman, but she herself, she's glad to set him up - I thought in disappointment, watching my friend's manipulations. - Well, what are you doing. - his wife whispered.

Daily Post- Lets Talk about Heel Plates (also sometimes used as Toe Plates)

When the lights came on in the cell, the elderly woman got out of bed. After eating and completing all the procedures, she hurried to the training room. Remembering the punishment, she, surpassing the wild tearing pain, ran along the track, squatted, pedaled the bicycle ergometer.

Now discussing:

Least Nikolai looked at mine. Even then, I really noticed that my Kolya was staring only at me with burning eyes, although for so many years he could have seen enough. - And in general yours and started these jokes so that someone else could look at your boobs. But this is something new, I didn't even think about it.

- And you know, really, he often gets me when we go somewhere.

7590 7591 7592 7593 7594