Dual xdvd156bt update

Dual xdvd156bt update DEFAULT

7" Multimedia DVD Receiver with Bluetooth - XDVD156BT

Features: 

• 7" LED Backlit LCD touchscreen (800p x 480p) 

• Built-in Bluetooth with hands-free calling, music streaming  

   and remote control (HFP, A2DP, AVRCP) 

• Front USB input (1 Amp charging for most phones) 

• microSD card input (support SDHC) 

• Front panel 3.5mm aux input 

• RCA A/V input (rear) 

• 2 RCA video outputs (rear) 

• Rear video camera input (RCA) 

• Built-in programmable steering wheel control interface (SWC) 

• Front/Rear/Sub preamp outputs 

• 7 EQ presets (Pop, Jazz, Classic, Rock, Beat, Flat & User) 

• Screensaver and 3 selectable wallpapers 

• Media playback: CD/DVD/USB/microSD 

• File formats : MP3/JPG 

• 200 Watts (50 W x 4)  

• AM/FM tuner 

• 30 stations presets (18FM/12AM) 

• Wireless remote control  

• Detachable faceplate  

Sours: https://www.dualav.com/dual-car-receivers/xdvd156bt

As sad as it might sound, Rajinikanth-Akshay Kumar starrer 2.0 full movie has been leaked online by Tamilrockers in Hindi version as well on the very second day of its release and the worst part ...

Urdu1 TV Official - Watch Pakistani Dramas Online, Urdu1 Dramas, Online HD Episodes, Pakistani Serials & Best Turkish Dramas.

The site is run in association with the books The Worldwide Guide To Movie Locations and Movie London. Titles with links have full entries on the site – other unlinked titles listed can be found in the books. All the titles will eventually have full entries, so check back often. Hi! – you are visitor

Going to the movie theater on Christmas Day has become a treasured holiday tradition for many families. Unlike other businesses, many theaters are open on Christmas and show must-see movies. Here are the best films (Christmas movies and otherwise) to see in theaters this December 2018.

Common Sense is the nation's leading nonprofit organization dedicated to improving the lives of all kids and families by providing the trustworthy information, education, and independent voice they need to thrive in the 21st century.

Best HD movies is also a free movie downloading website like other websites. Here you will find all the new films, series and pirated versions of movies to download. Whether it is 2017, 2018 Bollywood movies or new Bollywood full movies 2019 download. The best part of it is to see the content in different formats.

Latest Jobs in Pakistan Today 7 October, 2021 with jobs listing from all major newspapers in Pakistan updated on daily basis. Find paperpk job ads from Jang, Express, Dawn, Nawaiwaqt, Mashriq and other popular Newspapers for Karachi, Lahore, Quetta, Peshawar, Faisalabad, Multan, Hyderabad, Rawalpindi, Islamabad and other major cities on Jobs.com.pk

Sep 07, 2021 · The World’s Most Immersive Movie Experience.

Sours: https://webshopdutchstormdesign.nl/dual-xvm279bt-firmware-update.html
  1. Hf molecular weight
  2. Poncho mexicano mujer
  3. 92 honda accord
  4. Industrial indoor planters
  5. Galavision canal

These firmware updates are intended specifically for the below multimedia receivers models only. If you are not sure if you need an update or cannot locate your serial number, please contact customer service at for assistance.

Download Firmware Update. Speakers Gimbal Housing Splashguard Antenna. Multimedia Amplificadors Subwoofers. Product Updates. Full Catalog. Both the MCU and MPEG updates must be downloaded and applied for all updates and improvements to be added if applicable You must agree to the following conditions before downloading the upgrade software.

This software is not sold but licensed to the user by Dual Electronics. The customer has ownership only of the media containing this software and the ownership of the software itself is reserved by Dual Electronics Corporation.

The customer is responsible for the selection and installation of this software as well as the result of using this software. NSD - Aug.

B20 ef wagon

Default is set OFF. How to update: 1. Unzip the file 2. Copy all file into the USB thumb drive. Power on the Head unit. Press the green check mark to continue. Download Firmware Update Note: Use this update if your radio starts with the following serial number range and manufacturers date range only. NSD - Jul. Download Firmware Update Fixes volume issue How to update: 1.

How to Update PDF Download Firmware Update Updates and Improvements Improves operation when older phones or non Apple cables are being used to operate the CarPlay feature Improves video screen that may have had digital noise or pixilation when using older phone or non Apple cable. Keep In Touch. Modification, alteration, translation, merging, reverse compiling, or reverse engineering of this software is strictly prohibited.

Dual Electronics Corporation is the sole owner of all copyrights and intellectual property rights of this software and accompanying manuals and other documents. Dual Electronics Corporation does not guarantee the suitability of this software or its quality and function for the customer's use and will not be liable for any problems caused by the use of this software except as explicitly noted. Allows you to turn off the iPlug App in the settings menu of Bluetooth.

Fixes clock issue Adds date to home screen. Fixes volume issue How to update: 1. Updates and Improvements Improves operation when older phones or non Apple cables are being used to operate the CarPlay feature Improves video screen that may have had digital noise or pixilation when using older phone or non Apple cable. Join Our Mailing List.Due to high volumes, response times in the community may be delayed over the next few days.

Please refer to our self-help content for additional assistance. Thank you! Microsoft Support. Tech support scams are an industry-wide issue where scammers trick you into paying for unnecessary technical support services. You can help protect yourself from scammers by verifying that the contact is a Microsoft Agent or Microsoft Employee and that the phone number is an official Microsoft global customer service number.

My computer continues to say no signal on the monitor after i started my factory reset. If not then you have a problem with the hardware. The other possibility is the video output is actually going to another port.

dual xdvd156bt no video signal

Graphics cards should scan all ports to see if a monitor is connected and either output to all connected screens or define one as the primary. In a few cases I have seen this mechanism go wrong and output going to the wrong port. This includes the onboard output even though a card is fitted. Did this solve your problem? Yes No. Sorry this didn't help. Thanks for your feedback.

The Factory Reset just reinstalls the bloated factory install which no tech enthusiast would run in the first place because it's a terrible install.

You'll get a much better install following the the link which is the finest install of Windows one can have.

Ecg chipset

October 6, Due to high volumes, response times in the community may be delayed over the next few days. Ivan Pena This thread is locked. You can follow the question or vote as helpful, but you cannot reply to this thread. I have the same question HairyFool Independent Advisor. Hold the Power button for 6 seconds to ensure the computer is fully off. Press the power button as normal to switch on.

Civic d17 tuning

Thanks for marking this as the answer. How satisfied are you with this reply? Thanks for your feedback, it helps us improve the site. How satisfied are you with this response? In reply to HairyFool's post on April 3, I get the Asus Logo and i turned it off and back on and the same thing is happening. In reply to Ivan Pena22's post on April 3, Feel free to ask back any questions and let us know how it goes.

Then try swapping the video leads into other ports if you have them, as I said I even "found" the display was on the on board VGA port in one case. Help us help you!I tried the "live something" option that takes me directly to Kali Linux and it loads successfully but I can't install it permanently. Mechanic's Assistant: Soon. New member. Click "Download" button and press "Agree" button on the use contract page.

dual xdvd156bt no video signal

For further details on this update, see the release notes and migration guide in the BLE-Stack 1. Steering wheel control input. It also features built-in Bluetooth, microSD Card and 3. But as mentioned before, I prefer separate partitions for Windows and Linux. Due to its technical nature, it is highly recommended that your DUAL XDVDBT is installed by a professional installer or an installed and used in accordance with the instructions, may cause harmful interference to radio communications.

Two enable inputs are provided to enable or disable the device independently of the in-put signals. Works for Dual xdvdbt car stereo from Walmart. This article applies to the Ford F First, you must be using 32bt installer.

Tried everything I could find, compatibility mode when installing the driver and even modifying the apple driver inf and adding windows Please refer to your vehicle manual for confirmation of the type you require. Our extensive car stereo wiring harness collection ensures that you will find the exact wire harness connector kit needed for you car.

Capacitive touch screen is a layer of transparent special metal conductive material pasted on the glass surface.

Dual XDVD156BT Car stereo reciver with DVD and blu tooth

If your particular installation has an adapter that connects between the head unit and the factory wiring, then you can also unplug the entire thing and reconnect it to ensure that everything is making good electrical contact, and then attempt to power up the radio again. It endeavors to provide the products that you want, offering the best bang for your buck. Killer Kate! If the problem still persists, consult your nearest DUAL dealer or call tech assistance Maximum bitrate depending on your choice during installation.

I've installed the driver but windows says that there is no connection, mine is iv can you help me, thanks. Quick Start Manual, presented here, contains 10 pages and can be viewed online or downloaded to your device in PDF format without registration or providing of any personal data. Watch Queue Queue. Electronic library. You as an administrator or consultant have to have your toolkit with the latest ESXi installer ready in your pocketTo install a skin mod for GTA San Andreas, download the archive of the mod and run the automatic installer.

Windows server operating systems install fine on desktop motherboards and this is a valid requirement for developers, testers, support and education, or simply running a server workstation soLG LPWFC-SPD1 LGD - specifications, quality tests and profiles. Download books free. Installation of the firmware is simply If you have a dual-boot machine with a recent version of Windows and start seeing problems during For users of these devices who have problems when Wi-Fi and Bluetooth are running concurrently, we suggest to disable BT Coex by loading iwlwifi withThe network installer lets you install Ubuntu over a network.

This video is unavailable. Samsung Marvel Platform.Is great. I have an older van that just had a cd and an old cassette player. I had to have a store install it, because i needed an installation kit. But you could install it yourself they give instructions on how in the box. But this is an awesome radio, you can have dvd, cd, USB, mp3, or a micro sd card.

Just want to add the dvd player has the subtitle and repeat function, which are huge in our home. You can talk hands free with your cellphone you have to pair via Bluetooth. It comes with a remote for someone to use in the backseat, so the driver doesn't have to keep touching the screen. The sound is amazing the best I've heard in a long time in my car.

Oh and there are connections for you to have a backup camera installed later on if you choose so. Hands free calling, Bluetooth for hands free phone calls, connection for rear facing camera, steering wheel controls usb, 3,55 mm and micro sd storage. The screen is a brilliant x 7' backlit retractable screen and moves outward and upward smoothly and silently. The faceplate is detachable for security and comes with a super nice carrying case.

Connections are made easily via the included connectors. The seven band equalizer offers the most favored presets and is fully configurable. I have no need for full volume and I used to with my add on watt amp! The single DIN just means it will fit the standard car stereo opening. Mine went in an 03 Corolla no problem. I can think of nothing to add to make tis stereo improved. The price is phenomenal for the features and performance it provides.

Thanks Dual Electronics and thanks Walmart! I always wanted one of those voice assist hands free radios with a screen and now my dream finally came true! I love how I can talk on the phone and not hold my phone with this device, it plays movies, music, and keep the people in the car occupied while I am driving. I was amazed by the sound quality of this thing!

My husband has an older truck so I got him this to upgrade it a little. I cant believe the quality of the picture and sound. This is well worth the price it costs. Cant beat it for all the features this has! You can plug in your ipod or iPhone to it, you can answer calls via the bluetooth feature, and so much more!

Here at Walmart. Your email address will never be sold or distributed to a third party for any reason. Sorry, but we can't respond to individual comments. If you need immediate assistance, please contact Customer Care. Your feedback helps us make Walmart shopping better for millions of customers. Recent searches Clear All. Enter Location. Update location.Computers that generally don't include an integrated display, and are meant to be stationary.

So just today, I have this problem where my monitors does not display anything after start up. I would turn on the CPU and everything runs fine fans, power supply, etc but my monitors stay undetected as if my computer was never turned on. So far nothing has worked and I'm completely stumped. Everything was working fine until my computer randomly crashed darker today and then froze in start up to now not displaying anything.

Any help would be highly appreciated and thanks beforehand. All i've done is switched on gaming boost and A-XMP in my bios settings and got a blank screen showing no signal. I've tried everything mentioned in that question but haven't succeeded.

Monitor Says No signal after factory reset

Help me please. I too have same problem but today morning i just pressed f8 and started startup repair and my computer restarted and says no signal. It could be your PSU. Sometimes rebooting cleared it up but when my furnace went dead a few days ago the house temperature dropped from 70 to 37 degrees. At that temp the monitor never came on. I switched out the monitor with another and had the same results.

Thinking the temperature was a factor I ran a hair dryer on high for a minute and suddenly the picture on the monitor came on.

Product Firmware Updates

The picture stayed on for about minutes then went black as the power supply cooled. I warmed it again and the picture resumed. At that point I felt very confident it was the PSU so I ordered and installed a new one and the monitor and computer are both working like new.

Show 8 more comments.

dual xdvd156bt no video signal

Jimfixer jimfixer. Are you getting post beeps on startup? If not you may be dealing with a power issue. Just because your fans are running and your motherboard light comes on doesn't mean you have enough power in the power supply to run the machine. Power supplies can die slowly and still appear ok. If you have access to another power supply try changing it out. You may also want to try a different monitor or test your old monitor on another computer.

Also you mentioned you've disconnected the power and that you've held down the power button for extended periods. Did you do this together? Finally as dumb as this is going to sound but it happens to the best of us Just sayin Hope something here helps and good luck.

Thinking that temperature was a factor I ran a hair dryer on high for a minute, blasting the hot air on the PSU and suddenly the picture on the monitor came on. At that point I felt very confident it was the PSU so I installed a new one and the monitor and computer are both working like brand new.

Pc show display after removing battery or change cmos setting but when i shutdown and start again then again no signal error everytime when i remove battery or change cmos pc show display but only for one time. August 20 by M Zeeshan. Usually they are non rechargeable 3V DC coin cell batteries. August 20 by jayeff. Frenk Jolly. Posted: February Issue: When laptop is connected to the WD15 docking station, it will consistently not output video to an external monitor.

It's trying to simulate end user's taking their laptop to a meeting and coming back and docking back up with the lid closed. Our laptops are configured to "Do Nothing" when the lid is closed.

How much time it takes to forget someone you love

When attempting to dock, it does not consistently output video to the external monitor. The only way to restore USB port functionality is to shutdown the laptop and turn it back on again. Installing an older version of that driver fixed the issue at that time. Since it's resurfaced with this, we've tried the driver fix, and it no longer resolves it. I've tried reaching out to Dell support, but their only solution is to keep replacing the WD15 docks, but it doesnt resolve anything as issue occurs on replacement docks they send.

2011 genesis coupe front bumper painted

With all the troubleshooting I've done, my team and I feel that this HAS To be on an hardware level that Dell is not coming forward about. Anyone have any other Troubleshooting steps I've overlooked??? Wow, I have a that I've been using with a WD15 dock regularly for months and it's always performed flawlessly, so I'm really surprised to see you having this issue with multiple systems and docks. You've already tried basically everything I'd have suggested, but just to verify, when you have the dock connected, you do NOT also have the separate AC adapter connected, correct?

dual xdvd156bt no video signal

I'm not sure that could cause this type of behavior in fact I admit it's a long shotbut I know that's not supposed to be done. Also, what is the Realtek USB 2. Lastly, what OS are you testing with? Missed that originally. All troubleshooting has been with multiple of the original power adapters that came with the docks. Issue has occurred across multiple builds, but currently on Browse Community.

Turn on suggestions. Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type. Showing results for. Search instead for. Did you mean:. WD15 Dock not outputing video signal.Among many mediums to transfer audio and video data between electronic devices, HDMI is the latest and the most widely used interface. In case there is a miscommunication due to one reason or another, there will not be any output on the display or audio device. The first and the most common problem can be loose HDMI connections.

So, check the HDMI ports at both the source and output section. If you think the ports have become loose, you should buy a new HDMI cable and some good quality cables come equipped with a self-locking mechanism.

By changing the port, I mean you should try to change the ports both physically and on-screen software. Sometimes, by mistake, we change the input source on the TV or monitor, so open the display settings on the monitor there will be a touch button or a push button on the screen-frame itself.

Now select the appropriate signal source. You can press the source button on the remote and see all the available options. So, apart from changing port settings on the software menu, you should also try to change the port physically on the output device.

As you can see if you are not getting signal in one HDMI port try to plug-in the cable in another port. Here, you can see various options that include PC-screen only, Duplicate, Extend, and the second screen only. Make sure the right option is selected depending on the number of screensyou are using.

If you are not getting a display on the monitor of your desktop PC, you need to recheck the software drivers of the display card or on-board display chip. If you have drivers-dump on your system you can give its path or can automatically update the latest display drivers from the internet. Not all but most of the electronics devices provide the option to factory reset them This is handy in case something goes wrong and allows you to roll back to the original settings.

You can open the menu on the monitor and look for factory reset settings. If that is the case, you can open your dish-TV settings and set it to factory-reset to regain the display.

Chances of in-compatibility of these cables are high when we try to connect an older output device to a new input device or vice-versa.

The reason is that your new device might be updated to the latest firmware and proper handshake is not achieved between older and newer ports. Furthermore, you must note that DVI is capable of transmitting only video signals and for audio, you still need to use audio ports. This process is an act of recovering the electronics device from the state of un-responsiveness by resetting all the configuration parameters.

Allunga lapis

To power cycle the monitor you just need to disconnect the HDMI cables and turn off the power. Now, wait for few minutes before turning it on.


Sours: https://ibq.familiesj3308.pw/dual-xdvd156bt-no-video-signal.html
Dual XDVD156BT Car Stereo

Effective Dual DVD Bypass Codes (w/ NO SWITCH)

 

Eric

Bronze Member

Username: Eric985

Post Number: 24
Registered: Nov-06

Posted on   

I've researched many ways of bypassing the brake safety of Dual DVD systems, with the help of others in the "Bypassing parking brake feature" thread. For the ease of all new users, I decided to compile this list of the three easiest and most effective methods.

These methods have worked on a variety of Dual DVD systems (mainly XDVD8181, also XDVD710), unsuprisingly, since Dual stated to me that most installations have the same codes.

WARNING! It is usually ILLEGAL and most of all UNSAFE to drive while watching video. I only watch video while parked, and I suggest you do the same. This is for demonstration purposes only, if you use these codes, you do so at your own risk.

STEP ONE. Ground the E-Brake wire.
No matter which method you use, you must ground the brake detection wire. I suggest you tap it into the ground wire on your wiring harness (ensures a good ground).

1. FACTORY RESET METHOD (Temporary)
(This isn't the most effective, but it is the easiest to try, so it's worth a shot since it apparently works on some units.)
** Go to the Menu
** Get to the Settings Menu
** Select <yes> to Reset to Factory Settings.

Credit: DKA

Have recently heard complaints of this method not being permanent, as this is needed everytime they want to watch a DVD. Also, radio and screen angle presets are lost.

----------------

2. AUDIO CD METHOD (Permanent)
** Insert Audio CD
** Press PLAY
** Press STOP twice on remote
** Enter 26604 on remote
** Press ENTER
** Take out Audio CD and Insert a DVD

Credit: Myself via a DUAL Tech

----------------

3. DVD METHOD (Permanent)
** Insert a DVD
** Let it play until you hear sound
** Press STOP twice on remote
** Enter 26604
** Press ENTER

Credit: Adam P.

The blue warning screen should immediately go away after pressing the last digit of "26604." Still press ENTER as a precaution.  

Eric

Bronze Member

Username: Eric985

Post Number: 25
Registered: Nov-06

Posted on   

Each of these methods have worked for several different Dual users. I'm not saying they will definitely work on yours, but these seem to be the most effective solutions (aside from those requiring switches). Good luck and enjoy!  

Eric

Bronze Member

Username: Eric985

Post Number: 26
Registered: Nov-06

Posted on   

Method 3 worked for my XDVD8181.  

Adam Lane

New member

Username: Lanefa

New Bern, NC USA

Post Number: 1
Registered: Dec-06

Posted on   

3 worked, but when i turn my headlights on I get a "signal not detected" screen. Any ideas?  

Adam

New member

Username: Awp

Post Number: 2
Registered: Dec-06

Posted on   

Yes, you have the "Reverse Light" detection wire hooked to the illumination wire for the Instrumant lamps and it's triggering your Back-up Camera" input everytime you turn on the parking/headlamps. Pull the radio and unhook the Reverse Light sensor wire from your factory harness connection (I think it's a brown with a white tracer wire, look in he wiring diagram in the book to be certain and you probably have it hooked to one of the orange wires from the harness kit.)and just tape the ends over as it is not needed unless you will be using a backup camera.  

Pete Romano

New member

Username: Peaty

Post Number: 1
Registered: Dec-06

Posted on   

Just got done installing mine. I'm happy to say the third DVD method worked for me. I hooked up the yellow parking brake wire to a permanent ground and tested it before I installed it. Worked like a charm. I can't thank you enough. Nice work.  

Nick

New member

Username: Devilstoy

Jersey

Post Number: 2
Registered: Jan-07

Posted on   

do i need to do this with a cd and then again with the dvd or does just the dvd method # 3 work ? thanks  

Pete Romano

New member

Username: Peaty

Post Number: 2
Registered: Dec-06

Posted on   

Your post reminded me that I needed to do this again since I worked on my car this weekend and had to remove the fuse panel. I forgot because it kept my stations :-) I just this minute did it again and for me Method worked fine. I did have to try it twice but I think that was because I may have entered the numbers in wrong. No matter it worked :-)  

Nick

New member

Username: Devilstoy

Jersey

Post Number: 3
Registered: Jan-07

Posted on   

method 3 ?  

Nick

New member

Username: Devilstoy

Jersey

Post Number: 4
Registered: Jan-07

Posted on   

is that supposed to method 3 ? im doing mine tomorrow and want to make sure i do it right the first time lol  

Pete Romano

New member

Username: Peaty

Post Number: 3
Registered: Dec-06

Posted on   

Gaah yes method three sorry I thought I typed that.  

jorge q

New member

Username: Djnicoya

Post Number: 1
Registered: Mar-07

Posted on   

Can someone please tetll me how to ground an e-Brake? I have never done this and am not sure what im doing. i have the DUAL 8181 and just had it installed but I want to by pass the dvd security, but im not sure how to ground the wire.  

Pete Romano

New member

Username: Peaty

Post Number: 4
Registered: Dec-06

Posted on   

The yellow wire marked "Parking" needs to be attached to a ground. You can just attach it to the black wire from the speaker harness on the head unit.  

jorge q

New member

Username: Djnicoya

Post Number: 2
Registered: Mar-07

Posted on   

What could I be doing wrong. I grounded the ebrake wire ( cut it, striped off an end and grounded it against a screw per instructinos from an uncle cuz i didnt know how to ground a wire). I then turned on the car, played the dvd and hit stop twice and entered code and nothing, i also tried the other 2 methods, any advice as to what im doing wrong? or what else i could try?  

Pete Romano

New member

Username: Peaty

Post Number: 5
Registered: Dec-06

Posted on   

When you say e-brake wire do you mean the yellow one or the blue one? Just double checking. First thing I'd do is try another ground or verify continuity to ground at the screw you used for the ground.  

jorge q

New member

Username: Djnicoya

Post Number: 3
Registered: Mar-07

Posted on   

I used the yellow one. it also happens to have a green stripe. Also incase it makes a difference, My DUAL is an 8181 and it requires me to do a procedure with the parking brake to let it go, lift it, let it go and then lift it again in order to activate the screen, does that make a difference?  

Pete Romano

New member

Username: Peaty

Post Number: 6
Registered: Dec-06

Posted on   

Yes the yellow with the green stripe, your system sounds just like mine. I just connected the wire to the mount the stereo goes in, for me it's also where the stereo itself has a ground. Not sure this will help at all but I have my install here: http://www.scoobymods.com/forums/showthread.php?t=7238
You need to register to see the pics but it's free to do so. It did take me a couple of tries to get it to work. double check your ground too.  

jorge q

New member

Username: Djnicoya

Post Number: 4
Registered: Mar-07

Posted on   

Thanks for the help Pete. I finally got it to work, i just wasnt using a good enough ground and im a novice at this so i didnt wanna try to pull out the deck, but i found my way around pulled it out and grounded it to the harness. Thanks again  

kiet nguyen

New member

Username: Malicious01

Post Number: 2
Registered: Mar-07

Posted on   

does anyone know if anyy of the methods work on xdvd8265??? i see alot of people have success with 8181 but has anyone had success with 8265 or is my model gyro?  

Ray

New member

Username: Rayboogy01

Post Number: 1
Registered: Mar-07

Posted on   

Hey guys this is a great forum. I just had a dual xdvd8182 installed in my girlfriends car. I tried the bypass code method but it doesn't work. Does anyone know if there is a different code for this model or am I just doing it wrong? She has a Mitsubishi Lancer ES. I know it was a pain to ground it outside of the parking break. But the guy that I had install it spliced the antenna on the car. Any help will greatly be appreciated. Thanx.  

Malic Yousif

New member

Username: Malic

Oklahoma City, OK U Essay

Post Number: 3
Registered: Mar-07

Posted on   

What if you don't have a remote??  

andrew

New member

Username: Tacoman2006

Post Number: 1
Registered: Apr-07

Posted on   

question (alot off topic) the sudwoofer wire is mono? i have two lead going to my amp but if i connect it to the rear out from the player i cannot control the amp/sub how do i fix this do i "y" the mono sub pre-out? or what--- PLEASE HELP!  

Phillip Solorio

New member

Username: Solo67042

Post Number: 1
Registered: Apr-07

Posted on   

i just recently had a 8181 installed in my 05 monte carlo, i cannot get any of the codes to work for me. i had it installed at bestbuy, is it possible they did sonething so that i could not bypass the unit? any input would be great thanks  

Adam Lane

New member

Username: Lanefa

New Bern, NC USA

Post Number: 2
Registered: Dec-06

Posted on   

They connected the parking brake wire, which means that the code will not work! I recently went through this with my neighbor. After two weeks of arguing, he unhooked the wire, and, OMG, the code worked.  

Phillip Solorio

New member

Username: Solo67042

Post Number: 2
Registered: Apr-07

Posted on   

ok so i need to disconnect what wire??? i assum it would be the one running towards my parking brake but what color should it be just in case?  

Phillip Solorio

New member

Username: Solo67042

Post Number: 3
Registered: Apr-07

Posted on   

i found the wire leading to my parking brake, its yellow with a stripe of blue but i dont understand how unhooking it will make the code work. unhooking it would be like leaving it there since there is no ground, isnt that right? anyways thanks adam i just need more info  

Phillip Solorio

New member

Username: Solo67042

Post Number: 5
Registered: Apr-07

Posted on   

ok, well i unhooked the wire and grounded it to a bolt on the firewall, i am still getting the same result. since best buy installed the unit i cannot get the unit out to slice the wire into the ground. i can see under my dash the harness that was used and there is a black wire running out of that. is that a ground as well? sould i just use a splice connector to connect the 2 wires?  

george

New member

Username: Ghthree3

Thomasville, Ga Usa

Post Number: 1
Registered: Apr-07

Posted on   

i tried the three step process for the dual tv ,it worked great  

Michael Snell

New member

Username: Msnell901

Post Number: 2
Registered: Jun-07

Posted on   

dvd option work with 8181!!! great post! TY!  

Cody Mark Lorance

New member

Username: Codylornace

Texarkana, Tx U.S.

Post Number: 1
Registered: Jun-07

Posted on   

my xdvd8181 wont load a cd...i put it in and i hear it spinning and it says loading but then it follows with eject and out comes the cd...i need some help guys its really aggravating..please email me with any tips, thanks alot  

John Dancear

New member

Username: Dancear99

Post Number: 1
Registered: Jun-07

Posted on   

I need help too . I have my Dual in dash xdvd710 hooked up to my amp and subs. Every function (cd, dvds, radio, and aux) all play through my system but now my ipod wont. It plays but only through the my car speakers but will not play through my subs. Everything was working fine with the ipod until i hooked up the ps2 to the aux. Do you think that might have something to do with it or do you think a connection has came loose?

Sorry for posting in so many areas, just trying to get this solved.

If any one has any info about this can you please email me:

Thanks  

Fadi

New member

Username: Fadizzle03

Jackson, Michigan

Post Number: 5
Registered: Jul-07

Posted on   

CAN YOU PLEASE TELL ME IF THIS WORKS WITH THE XDVD8183? DO I NEED TO HAVE THE WIRE GROUNDED? I WOULD APPRECITE THE HELP  

gary

New member

Username: Troubleis

Post Number: 2
Registered: Jun-07

Posted on   

Dual 8265

DVD code worked, make sure you are using the main remote when entering the code.  

gary

New member

Username: Troubleis

Post Number: 3
Registered: Jun-07

Posted on   

^^^^^^^ Should be dual 8285  

Elliot Thomas Simoneaud

New member

Username: Esim1983

New Iberia, Louisiana U.S.

Post Number: 5
Registered: Jun-07

Posted on   

I have an indash Ford F-150 navigation, it is a 2007 audiophile does anyone know how to get it to play Dvd's? Also do you know how to get the bluetooth feature working for my cell phone and the unit? I have tried to press the mute button twice, but nothing happened! Thank you Elliot  

bo

New member

Username: 1fierce1

Post Number: 1
Registered: Sep-07

Posted on   

Please help. I need the bypass code and proceedure for a Pioneer AVHP4900DVD.  

Joe

New member

Username: J0schm03

Post Number: 1
Registered: Dec-06

Posted on   

I'm wondering also if this works for the 8183. Cause I'm about to get mine sent to my place. Had two 8181 units break on me under warranty so they said they are sending me the brand new model :D

Thanks if anyone knows if this works.  

COLLI SPIRINGER

New member

Username: Cspiringer

Post Number: 1
Registered: Oct-07

Posted on   

Does any one know how to bypass the parking break on a dual xdvd8182 i tried the codes they did not work  

GEORGE STEFFES

New member

Username: Grsteffes

DEL VALLE, TX USA

Post Number: 1
Registered: Oct-07

Posted on   

DOES ANYONE HAVE IDEAS FOR THE OVERIDE CODE FOR THE MITSUBISHI MULTI-COMMUNICATION SYSTEM I WOULD LIKE TO OVERRIDE THE DVD SO IT WILL PLAY IN DRIVE FOR THE BACK INSTALLED SCREENS  

Francis OHara

New member

Username: Francis_ohara

Post Number: 1
Registered: Oct-07

Posted on   

Okay, I am new to installing a car stereo. I put a JVC KD-NX5000 in a 2000 BMW Z3 Roadster. Please explain how to bypass the DVD block so it will work with parking brake off. Thanks in advance for the help.  

Ruben Rosas

New member

Username: Soloshy

Post Number: 1
Registered: Nov-07

Posted on   

I have a dual 8181 and I just hooked it up and I hooked it up just how it said in the book. but I dont think im hooking sum thing up right cause I keep geting that screen to pull the parking brake to watch the video. What do I do, do I not hook that yellow and blue wire just ground it to metal and do step number three. help me out please}}}}  

Ian White

New member

Username: Fordguy07

Marlow, OK

Post Number: 1
Registered: Nov-07

Posted on   

how do i bypass the brake after the wire is grounder on Dual XDVD700  

Tim Owen

New member

Username: Timowen1

Tipp City, Ohio USA

Post Number: 1
Registered: Nov-07

Posted on   

method 3 worked for my XDVD8183  

Tim Owen

New member

Username: Timowen1

Tipp City, Ohio USA

Post Number: 2
Registered: Nov-07

Posted on   

does anyone know if it is possible to make the time of day default on start up instead of current radio station on the Dual XDVD8183 maybe using a set up change simular to the brake wire bypass.  

Phillip Harris

New member

Username: 06dodge20

Shawsville, Virginia Mongomery

Post Number: 1
Registered: Nov-07

Posted on   

I have a Dual 8181, I am wanting to hook up my Playstation 2 to it. How do I do this? Also How long does it take for the screen saver to come on? It says its on but It has never came on.
Thanks  

bzb

New member

Username: Bzbatl

Post Number: 1
Registered: Dec-07

Posted on   

Method 3 worked for me on a Dual XDVD8183 purchased from Best Buy. Thanks!

Any ideas if there's a firmware upgrade for this DVD player to allow DivX?  

Matt Shott

New member

Username: Sp0rt4320

Cirtus Springs, FL US

Post Number: 2
Registered: Nov-07

Posted on   

What is with the Dual8181 screen saver...It has an on/off switch but what is it.  

ALEXANDER

New member

Username: Cyberalexander

Post Number: 2
Registered: Jan-08

Posted on   

Hello, I have a Dual xdvd8285 applies the code for parking bypass, but now when placing the screen in stanby, it is placed in black only about 5 seconds and then reappears video, it is not applied according to the Standby screen, I do? Has something to do bypass brake by code? Thanks.  

alex goodwin

New member

Username: Albundy0808

Post Number: 1
Registered: Jan-08

Posted on   

how do you ground the e brake wire?  

Tim Owen

New member

Username: Timowen1

Tipp City, Ohio USA

Post Number: 5
Registered: Nov-07

Posted on   

alex goodwin you did not say what head unit you have. I have the Dual XDVD 8183 and I have used the bypass code and bypassed the e-brake set up all together and grounded my e-brake wire at the same place and along with my head unit ground wire.  

alex goodwin

New member

Username: Albundy0808

Post Number: 3
Registered: Jan-08

Posted on   

i have a dual xdvd 8182  

Brenden Fraser

New member

Username: Bfraser9655

Arlington, Massachusetts

Post Number: 2
Registered: Jan-08

Posted on   

just got xdvd8183.. tried all three codes.. none worked.. any ideas on what to do?  

Tim Owen

New member

Username: Timowen1

Tipp City, Ohio USA

Post Number: 6
Registered: Nov-07

Posted on   

Brenden Fraser, take your time and try no. 3 again. Make sure you follow the directions exactly as printed. I can't believe it don't work. Is the yellow ground wire hook up right? I connected my yellow ground and the black head unit ground wire together and connected them to the radio harness ground. That way the are getting the original radio chassis ground that was factory installed when the head unit wiring harness is plugged into the factory harness. What type of vehicle are you working with?  

Brenden Fraser

New member

Username: Bfraser9655

Arlington, Massachusetts

Post Number: 3
Registered: Jan-08

Posted on   

its a 2004 taurus. i figured out what went wrong, the ground wire came loose from its connector while i was putting my dash kit in. i crimped them together and it works great now.  

Tim Owen

New member

Username: Timowen1

Tipp City, Ohio USA

Post Number: 7
Registered: Nov-07

Posted on   

Great. now be careful and don't get caught watching movies and driving...  

Lucas

New member

Username: Lchoate

Post Number: 1
Registered: Feb-08

Posted on   

I used method 3 to unlock my XDVD8285. Worked like a charm. I have the ground switched so that if the police are near by, I can blank the video and the code does allow me to still effectively un-ground the wire and blank the video.

Anybody aware of firmware upgrades or a method to load code on these units? I absolutely hate the way it works with my ipod. I'm also not thrilled with the menu system in general. If I had a method of loading code, I'd give it a shot.  

chris p

New member

Username: Bamckychris4

Post Number: 1
Registered: Feb-08

Posted on   

does anyone know the codes work for a xdvd700 i was going to buy one but decided to do some research first and haven found anythink working for that model if you have any info on that model please email me  

Dan Beaver

New member

Username: Djblenda

IA

Post Number: 1
Registered: Feb-08

Posted on   

I just had Best Buy install a Dual xdvd 8281, are there any codes for this one so I don't need a switch?
Hit me up  

StateProp486

Silver Member

Username: Stateprop486

PA

Post Number: 391
Registered: Jan-08

Posted on   

dual dvd players suck period.  

Joel LaMadline

New member

Username: Keodie

Dub K, Kansas USA

Post Number: 1
Registered: Feb-08

Posted on   

hey guys iv been listening in and have put in a Dual xdvd700 but the thing is when i try the switch and click it ON the dvd movie comes on but only for a split second i try it again then it either does the same thing or it goes to the blue screen that says it has to be connected to the parking break but that also only stays on for a split second and it does this every time i try it. Any ideas anyone i would greatly appreciate it. Thanks  

kiet nguyen

New member

Username: Malicious01

Post Number: 3
Registered: Mar-07

Posted on   

you have a horrible ground or your wiring is off  

Joel LaMadline

New member

Username: Keodie

Dub K, Kansas USA

Post Number: 2
Registered: Feb-08

Posted on   

Well I thought about that and I moved it to the units ground wire and its has continued and im pretty sure the wires are all correct I individually connected each color wire to the same color and triple checked it.  

kiet nguyen

New member

Username: Malicious01

Post Number: 4
Registered: Mar-07

Posted on   

are you sure the wiring is correct, i mean not that they arnt secure but are you positive that all the wires are connected where they are suppose to be? the wire from the headunits labeled parking brake should be to a good ground... the only other wires conected to be speakers, opt sub, opt antenna, and constant 12v and accessorie.. as long as parking is to a good ground, you should check to make sure you did the procedure correctly, some people it takes 2 or more tries... sometimes when it flashes on then goes off its cuz the unit isnt unlocked... it just gets a glimpse of the grounded brake but then doesnt bypass the restriction for video display... you myte also wanna double check if your model is able to bypass parking brake for video... check those and post back what you find...  

Joel LaMadline

New member

Username: Keodie

Dub K, Kansas USA

Post Number: 3
Registered: Feb-08

Posted on   

ya know what I showed my friend that I bought it from and he was really confused and said it had to have been the screen on the player so we exchanged it from where he bought and got a new one and this one works lol thanks for all the suggestions tho i really appreciate it  

Joel LaMadline

New member

Username: Keodie

Dub K, Kansas USA

Post Number: 4
Registered: Feb-08

Posted on   

Im such a noob lol  

champ

New member

Username: Champaroo

Post Number: 1
Registered: Feb-08

Posted on   

is there anyway to punch in the code withought a remote or does anyone know where i cold pick up a remote for the 8181 model  

kiet nguyen

New member

Username: Malicious01

Post Number: 5
Registered: Mar-07

Posted on   

you have to have the remote to punch in the code, and you can contact dual and request a new remote which will cost you a little money + shipping... or just hop on ebay and do a little searching... but whichever way, a remote is a must... even if you couls borrow a friends, it would work cuz the code is a 1 time thing and its permanant unlocked...  

Connie

New member

Username: Connieh1968

Post Number: 1
Registered: Mar-08

Posted on   

Has any one had a problem with it playing burnt dvd's? It will play some of mine but then some it will not, all were burnt the same way, same program. Any suggestion. I keep getting the error code, NOT COMPATIBLE FILE, but then when I take it and play it in my computer or dvd player, it plays fine.  

kiet nguyen

New member

Username: Malicious01

Post Number: 6
Registered: Mar-07

Posted on   

depends if you use dvd-r and dvd+r and it also depends on how your comp burned the files, if you overburn (burn more then the disc capacity) with programs like nero then it will mostly not play... other then that i dont know why it wouldnt play... mine reads dvd+R and -R, has full touch screen for burnt custom music vid dvd's that i burn, and again i dont overburn and use almost all mpeg3/avi files only... hope this helps  

Connie

New member

Username: Connieh1968

Post Number: 2
Registered: Mar-08

Posted on   

Can you tell me what program you use? I don't use Nero. I did use two different programs last night burning the same movie, one worked and one did not. I used DVD Fab to copy, then 1 Click DVD to copy. THis worked in the system, altho the ending froze up. Then I used DVD Next Copy and it would not play at all.  

Connie

New member

Username: Connieh1968

Post Number: 3
Registered: Mar-08

Posted on   

Let me correct my post.

I burnt the same movie twice. Once using DVD Fab to copy the movie, then 1 Click copy to burn to disk. I am using Memorex LightScribe, DVD+R. Then I used DVD Next Copy to do it all and it would not play at all.

Can you recommend a different media that you have used and had not had problems with along with the software?  

State_Property

Silver Member

Username: Stateprop486

PA

Post Number: 949
Registered: Jan-08

Posted on   

i got 68 music videos on an dvd+r hahahaha  

kiet nguyen

New member

Username: Malicious01

Post Number: 7
Registered: Mar-07

Posted on   

i can only fit 40 on a dvd-r but that's including animated intro and hd quality videos (~90 mb each)  

kiet nguyen

New member

Username: Malicious01

Post Number: 8
Registered: Mar-07

Posted on   

connie - to be honest i use cheapo non lightscribe discs. the brand i use is windata-r but u can use +r as well and 100% playback everytime. i would recommend going to the store and just buy regular dvd+r/-r (non lightscribe or double layer)

it could also be the way you rip the movie to your computer. format is always important. i would recommend trying to dl the video in mpg or avi n then burn it to disc n see if that works n if it does than it's the way ur copying the movie to the computer

kiet  

Connie

New member

Username: Connieh1968

Post Number: 4
Registered: Mar-08

Posted on   

Thank you so much for your replies, I appreciate it. I am using Memorex DVD+R, non lightscribe and an older program. So far, they are working great!!  

kiet nguyen

New member

Username: Malicious01

Post Number: 9
Registered: Mar-07

Posted on   

Connie - awsome to hear that... glad everything is working out, sometimes the littlest less technological things work out the best in the end... enjoi all the media and be careful not to let those eyes wander while driving =P  

Connie

New member

Username: Connieh1968

Post Number: 5
Registered: Mar-08

Posted on   

Guess I talked too soon!! You never told me what programs you are using...I am mainly copying movies for my 2 year old. We had a unit installed overhead, but the dvd part broke, it never had problems reading anything I burnt. So we installed this Dual DVD700, I put another burnt movie in it last night testing it again, nope, skipped and all garbage. We were thinking about going to Jensen 9412? Any clue if a better "named" product would do better?  

Connie

New member

Username: Connieh1968

Post Number: 6
Registered: Mar-08

Posted on   

I called the company to see if they could recommend something, he said mainly just had to hit or miss with the media and to burn at a slower speed.  

kiet nguyen

Bronze Member

Username: Malicious01

Post Number: 11
Registered: Mar-07

Posted on   

hmm... i use a program called NERO which is an exelent burning program... i ussualy use dvd FAB ti rip and NERO to burn(only copying what i own for my private use in my car), if it was a hit or miss case then its a hit every time...

my setup is:
sony optical dvd reader/burner/rewrite

windata DVD -R and DVD +R

DVDFAB HD Dycrypter is the program i use to rip to computer

DVD Shrink to compress the video
-OR-
just burn with NERO, both takes equally long, Nero compresses for you which takes time, DVD shrink compresses but is lengthy as well, after compressed, NERO burns an about 5 minutes...  

Connie

New member

Username: Connieh1968

Post Number: 7
Registered: Mar-08

Posted on   

My husband went up to Circuit City, he took a stack of DVD that I have burnt, some that will work, some that don't. He put them in the new Phase Linear and the Jensen, they all played. So he bought a new one and will take this Dual back. Thanks for all of your help!  

kiet nguyen

Bronze Member

Username: Malicious01

Post Number: 12
Registered: Mar-07

Posted on   

sounds great and np, glad to help out =P  

danny

New member

Username: Eclipseboy

Post Number: 1
Registered: Mar-08

Posted on   

brake over ride code for a pioneer avh-p4900dvd  

jason heck

New member

Username: Jason1413

Post Number: 1
Registered: Mar-08

Posted on   

i just installed a xdvd8181 but everytime i turn it on i get "signal not detected" being in camera mode. mode button wont work. everything worked fine when i tested it. only thing that is different is that i pluged in the iplug input. not sure what to do here, but this post has helped me with all of my other problems.  

kiet nguyen

Bronze Member

Username: Malicious01

Post Number: 13
Registered: Mar-07

Posted on   

danny - this is a DUAL bypass thread, so im not sure your gonna get any help on over ride code for pioneer


jason heck - theres a small chance the unit is defective... i have had horrible experience with 8181 with cd/dvd getting stuck and the door stays open... id say exchange for a new one  

jason heck

New member

Username: Jason1413

Post Number: 2
Registered: Mar-08

Posted on   

thanks kiet i'll swap it out and see if that works. thanks a ton for your help.
love, peace, and hair grease  

kiet nguyen

Bronze Member

Username: Malicious01

Post Number: 14
Registered: Mar-07

Posted on   

np man, and jeez i havnt heard that phrase in a looong time =P take care and let me know how everything goes..  

shawn sickler

New member

Username: Tangi

Post Number: 1
Registered: Mar-08

Posted on   

I just installed dual xdvd-8285 in a isuzu rodeo. cd player is working but the fm tuner is not,it has a blue wire that is a power antenna.i have the regular ant wire in the rodeo can anyone please tell me how to fix prob......thank you  

kiet nguyen

Bronze Member

Username: Malicious01

Post Number: 15
Registered: Mar-07

Posted on   

shawn sickler - you say you have a regular (non power) antenna?.. there should be an antenna wire that connects into your factory headunit (cd player/tuner). that antenna wire which is a thick audio looking wire should connect straight into the back of the DUAL xdvd8285 unit... if you do NOT have power antenna equipped on the car, that blue wire should be taped off because it is useless... make sure that the original thick antenna wire isnt loose in your dash, ive doe that a couple of times... if your factory unit recieved fm/am tuner then there was a wire which you need to connect to the new unit to recieve fm/am radio... hope this helps


-kiet  

shawn sickler

New member

Username: Tangi

Post Number: 2
Registered: Mar-08

Posted on   

Keit, Thank you for responding so fast,there is not a spot anywhere for the stock antenna wire. the only thing thing there is is a blue wire out of dual for a power antenna. how do i convert over to a power antenna ..thanks for all your help  

Andrew Gomen

New member

Username: Toointense57

Post Number: 1
Registered: Mar-08

Posted on   

Im having an issue with my xdvd700. I am trying to burn music videos off of my computer onto a disk to watch in my car. however when I do so the disks work in my dvd player in my house, but when I put it in the player in my car it says "file not supported" any idea on maybe what I can do. I know this has nothing to do w/ the e brake by pass I figured that out on my own. I am just getting really frustrated with this not working and hoping someone out there can help me. thanks!!!!  

Connie

New member

Username: Connieh1968

Post Number: 8
Registered: Mar-08

Posted on   

Andrew, the best thing you can do is take it back and get a Jensen. We bought that same player a few weeks back. Every program I used and every way thinkable, I still had the same problem you do. Had my husband take it out and took it back, got the Jensen for $100 more and it plays everything! We took a stack of DVD's to the store and put them in to test them first. The Dual brand would not play any of them, the Jensen has yet to spit one out!! If you read above, I posted the same problem and one person tried to help me but I still had issues.  

kiet nguyen

Bronze Member

Username: Malicious01

Post Number: 16
Registered: Mar-07

Posted on   

shawn sickler - you convert over to a power antenna by installing a power antenna ontot he vehicle... then connecting the wires for the power antenna up ie. power to power, blue wire to blue wire for headunit signal...

Andrew Gomen - my experience with the sdvd700 is very slim... apparently alot of people are having trouble with burnt discs on this unit... i would say take connies advice and spring for a better unit... I have the dual xdvd8281 and it plays everything i throw at... sometimes i can burn crap discs out of mistake and it will still read wut i put on there (movies, home videos, music, mp3 disc, mp3 dvd disc, everything)

Connie - hows the new player working out for you now? yeah some duals are crap, i guss the model i have is just lucky lol... i believe most of the newer in-dash duals play everything and after its ulocked it plays everything while driving... no issues with the last 2 duals i bought, maybe its a 700 thing...  

jay see

New member

Username: Damaged

Post Number: 1
Registered: Apr-08

Posted on   

I have a Dual xdvd701, worked fine yesterday, other than playing DVDs with or without the parking break on. So I did the 3. DVD METHOD (Permanent)
** Insert a DVD
** Let it play until you hear sound
** Press STOP twice on remote
** Enter 26604
** Press ENTER

Worked great last night. but now since I got in the car this morning no DVDs will play, video or MP3 and I cant even access the DVD setting in the main settings. This sucks!

Tried reseting it numerous times with the front little button as well as through the touch screen. Resets but still jacked! Anyone have this problem and know the solution??

Thanks a million in advance.
J  

JB

New member

Username: Jb601

TN

Post Number: 1
Registered: May-08

Posted on   

THIS MAY HELP


Just purchased a Dual XDVD700 from Wal-Mart and installed it in my 96 Monte Carlo. Method 3 worked for me just fine. I simple used the ground wire going to my cigarette lighter since it's a known good constant ground and in very close proximity to my installation area. I snapped and screwed everything back in place followed the simple steps outlined in method 3 and it worked like a charm.
DVD-Video Format - I have a ton of music videos since I've have been using screen for many years now. After acquiring my video I simple convert it using Magic Video converter, converter the files to DVD-MPEG2, burn them using Nero to make a basic data disc with the converted file and it plays every round like a champ.
Now if you want a high quality DVD use Roxio Media Creator 10. I create a DVD Jukebox and it allows you to create custom menus with ease and will do all the ID Tag and Case Pics for you. It plays just like a DVD except it is all music videos. I take mine a step further and get all the updated ID Tags first prior to using. Now you may want to give overnight to burn because believe me it's in no rush. Once it's done you will have an impressive DVD with all your music videos that are selectable like typical chapters on your movie DVD and provides not only track and artist info during playback, but pics of CD's cover. Now if you really want to go extreme....may I should just save that for a later post.
One other thing, please keep in mind that DVD-Formats are selectable for a reason. A Mass DVD production uses a stamp to place information on disc and encodes it by regions. DVD Player Manufactures make sure their product will read that region. In our case we use a laser to scribe the information on the disc. Even though DVD manufactures can make a universal laser, but they don't, to read these formats, they select a list of supported formats to program the ROM chip to read and leave it up to the end user to scribe their DVD using one of the supported formats. With this in mind, not all "home-Made" DVD will work in every DVD player mobile, portable, or home. Even though it may get a little expensive, it is good practice to test a few DVDs and DVD formats till you find the quality you seek. Use a good converter to avoid garbled, choppy, or low quality play back. This not only apply to this thread, but to anyone who's scribing and encoding their own DVD's at home.
Hope this helps.  

Connie

New member

Username: Connieh1968

Post Number: 9
Registered: Mar-08

Posted on   

Can you beleive I am having trouble again?? LOL

I am using DVD Next Copy PRO to burn my movies...kids movies work great, all I can think of is that they are shorter, so they burn better? But when I try to do a full length movie, the first 20-30 minutes will play great, then they start acting up. Using Memorex DVD+R. I think I will go get some verbatim tonight...any clue??  

JB

New member

Username: Jb601

TN

Post Number: 2
Registered: May-08

Posted on   

Hum, there could be several different factors involved. Trying a different DVD would be a quick and easy step. DVD Next Copy is an evolution of the older DVD X Copy. Unfortuantly I haven't toyed around with DVD Next Copy since I found a suitable program that I use. But my expericence with DVD X copy was a little troublesome that I would have liked it to be. DVD X copy allocates a certain amount of system (computer) memory and the total amount of the DVD buffer (or memory the dvd player/record has built in) When DVD X copy starts is process it attempts to make it as stream line as possible, so when the computer attempts to use the memory for another process it will cause DVD X copy to halt or slow down, causing it to gap and just mess a movie completely up. I would use another program. I use Clone DVD2 by elby along with Slyfox to back up my movies. Its really simple to use and uses a different memory allocation and retentsion process. I've backed my movies up to everything with this program. I had one issues, but that was due to my dvd burner going out. Hope this helps.  

kiet nguyen

Bronze Member

Username: Malicious01

Post Number: 17
Registered: Mar-07

Posted on   

connie - i would say like JB said, first step easily shoiuld be to use a different brand dvd+/-r ...

then i would say if this does not change the quality output then you should try a different burn program, NERO works wonderfully with burning movies...

you should sample the dvd's in your home stand alone dvd player first to view and defects in the quality... obviously if the quality is good on your home dvd player then once again it is the headunit problem...  

Connie

New member

Username: Connieh1968

Post Number: 10
Registered: Mar-08

Posted on   

JB do you happen to have the links to those programs. I know most allow you to try them a few times first, I would do that then purchase them.
Just to add a note, I have one computer that does nothing but burn dvd's. So there is nothing running along with the DVD Next Copy Pro to cause problems. I upgraded and that is when I think I started having the problems. But I am willing to try your mentioned softwares. Which one would I use first?

THanks for all your help!!! I'm going to go tomorrow and get some verbatim dvd's.  

Jason Carden

New member

Username: Darkestcard13

Post Number: 1
Registered: May-08

Posted on   

ok first of all i used method 3 for my 8181 and it worked great so thanks for that. but i have a question for whoever might be able to help me out. I want to be able to put music videos on a dvd and watch them. But my 8181 wont read them. Can anyone please help me out with this. I read above how a few people can play music videos while others cant. So any suggestions would be greatly appreciated. Thanks!!!!!  

Connie

Bronze Member

Username: Connieh1968

Post Number: 11
Registered: Mar-08

Posted on   

Bought some verbatim brand. Some skip, some doesn't, that's still using the DVD Next Copy. I bought DVD Shrink 08. Tried that and worked perfect a few times, now I can't get it to work at all, need to get in touch with the company. What about a double layer media? What are your takes on using that type to hold all the data? I downloaded the DVD Clone as JB has mentioned, but some of the DVD's are crypted (don't ask, I won't tell) so it doesn't allow me to copy! HELP?? Willing to spend the money to get it right!!  

Edward L. Arrington Jr.

New member

Username: Night_hawk

Post Number: 1
Registered: May-08

Posted on   

If you own a Dual XDVD8183 the easiest way to bypass the parking break safety feature is to simply connect the parking brake wire (yellow wire) and the reverse wire (white wire with the brown stripe) to the ground wireon the harness. Connect all of that to the ground wire on the car (the black wire attatched to the car). The unit will think that the parking break is engaged. I did it on mine and it worked perfectly. I do not know if this works with other Dual models.  

alexander mendola

New member

Username: Nelchis

Post Number: 1
Registered: May-08

Posted on   

HI I HAVE A STORE IN VENEZUELA AND I SELL DE DUAL DVD PLAYER FOR CAR MODEL XDVD 8181 I USED THE CODE METHOD 3 AND ITS WORK THANKS A LOT.... BUT I SELL ONE DVD PLAYER TODAY AND THE CODE DOENST WORK ? I PRESS THE NUMBER 26604 BUT IN THE MONITOR ONLY SHOW 6604 PLEASE HELP ME TO UNLOCK THIS DVD PLAYER THANKS A LOT  

Bobby

New member

Username: Bphunk

Post Number: 1
Registered: Jun-08

Posted on   

Dual XDVDN8290

Can anyone verify that this code and procedure works for the Dual XDVDN8290. I am looking to buy one and want to know if I can disable to safety measure.

Dual XDVDN8290  

Mike

New member

Username: Radrhino07

Humble, Tx. USA

Post Number: 1
Registered: Jun-08

Posted on   

Ok stupid question here, but which one is the stop and which is the enter.  

chastidee tilson

New member

Username: Dtilson

Post Number: 1
Registered: Dec-08

Posted on   

okay, so i just got a dual xdvd700 as an early christmas gift, i decided to just google it and see what all was said abiut it, after reading this im wondering if maybe the xdvd700 isnt good. i must say i am only 16 and i am new to driving so i wont be needing to watch and dvds while driving. So the issues with the 700 not playing burnt dvd isnt an issue to me. So other than that is the xdvd700 an okay gift. I dont want to be stuck with a crappy player. Are there any other problems that have come up with the xdvd700??? Please let me know.  

Jeremy

New member

Username: Karmahkid

Post Number: 1
Registered: Dec-08

Posted on   

Hi folks,

I received my Dual XDVDN8190 yesterday from Crutchfield and installed in my Jeep Overland last night. I grounded the e-brake wire to the ground on the harness, powered it up, popped in a DVD and bam it played no problem. I went ahead and followed the instructions from "3.DVD Method" above and it also worked. Thank you!!  

mike wilson

New member

Username: Emtmike

Tennessee

Post Number: 1
Registered: Dec-08

Posted on   

26604 worked for me on my Dual XDVD 700.
It's been flawless so far... Got the p-Brake wire permanently grounded to the power-point outlet, as it was convenient to the H/U just behind the dash on my truck.  

Crystal Pastorius

New member

Username: Mudiechick13

Post Number: 1
Registered: Jan-09

Posted on   

Hey guys I just got a new XDVDN8190 and i am trying to get the dvd to work without that e-brake wire connected. I grounded it out to the ground from the wire harness and entered the code you guys got and I can't get it to work? Am I doing something wrong or is there a different code for my stereo? Can someone help me?  

mike pannullo

New member

Username: Thebombmp

Las vegas, Nv Usa

Post Number: 1
Registered: Feb-09

Posted on   

i just ordered the dual xdvdn8290, can anyone help me with the dvd bypass  

Jeremy

New member

Username: Karmahkid

Post Number: 2
Registered: Dec-08

Posted on   

Hey Crystal,

I also have the XDVD8190 installed in my Jeep. I performed step #3 without grounding the ebrake wire first but no luck. I then temporarily grounded the ebrake wire directly to my truck on the frame under the dash just to verify that it worked. I then followed step #3 again and voila, it worked! Let me know if you still cannot get it to work.  

Crystal Pastorius

New member

Username: Mudiechick13

Post Number: 2
Registered: Jan-09

Posted on   

Hey Jeremy Thanks for getting back to me I got it figured out now. But I have a new question for ya... Does your stereo, when you turn your jeep on, come on louder then when you shut it off?? And sometimes when you start your vehicle is there no sound at all cause it happens to me quite frequently and if i can get it to shut off, Cause sometimes it dont want to shut off it just beeps at me, it will have sound again. Can you please help me with this one I dont know what to do and its really bugging me!!!!  

[email protected]

New member

Username: Djanim8

Post Number: 1
Registered: Feb-09

Posted on   

Bobby:

Dual XDVDN8290

Can anyone verify that this code and procedure works for the Dual XDVDN8290. I am looking to buy one and want to know if I can disable to safety measure.

Dual XDVDN8290

I just purchased the XDVDN8290 and option 3 worked. I didn't think it was going to.... but I got to the menu screen on the DVD and did it, and it worked fine.  

Jorge Acuna

New member

Username: Jorgeduardo

Post Number: 1
Registered: Feb-09

Posted on   

Does anyone know how to connect an Ipod Classic (6th generation) with a Dual XDVD8183 in order to have full control and video support on screen??  

demond ward

New member

Username: Demond

Post Number: 2
Registered: Feb-09

Posted on   

I put in the code for the xdvd710 26604 and blue screne still come on when ebreake is up but plays when it is down  

Peter Bober

New member

Username: Allnatual

Post Number: 1
Registered: Apr-09

Posted on   

How are you guys doing? I'm new to this forum so bare with me.

1) I own Dual xdvd8183. Is the a on/off switch for subs? Can you turn them off completely? In eq section you can only minimize the bass.

2) When I'm going to speaker menu, I cannot switch to 6 channel setting. Why is that?

Thanks Alot!!!  

Sprawlking

New member

Username: Sprawlking

Corning, New York

Post Number: 1
Registered: Dec-09

Posted on   

Hello everyone! I'm hoping someone can help me, or at least provide an answer to this question. I own an XDVD8285 and I'd been using a 1st generation IPOD Nano. I recently switched IPODs to a newer generation IPOD and now I am unable to control the IPOD functions through the unit, but only through the IPOD itself. Is there anything I can do, e.g. does it require a different Iplug? or is it that this unit only works with older generation Ipods?
Sours: https://www.ecoustics.com/electronics/forum/car-audio/302701.html

Xdvd156bt update dual

  • 1975 buick station wagon for sale

  • Jmt saber trigger

  • Computer science lifestyle reddit

  • Gold claims for sale in fairplay colorado

  • Trac off button lexus rx350

    Syair hk asiktoto

  • Fuel system 1 status ol fault

    Cool math games clicker heroes

  • Asus maximus viii gene m 2 ssd

    3

    Athlon ares btr 4.5 27x50 ffp review

    0

    Bmo harris debit card expiring

    Tuning coyote engine

  • Reinforced concrete design textbook

    Soul randb blogspot

  • Pirate iptv

  • Systemverilog associative array iteration

  • Gtx 3060 vs gtx 1060

  • Free digital countdown timer for powerpoint

  • Pressure percent20vesselpercent20 inspection

  • Send epub to kindle mac

  • Seizmik upper doors for polaris general

  • Cross sectional research design

  • Limiting and excess reactants worksheet answer key

  • Gloabl pubg esp apk

    Cfm and static pressure relationship

  • Lg inverter direct drive dishwasher manual lds4821st

    Pcie 6 pin to 8 pin

  • 2002 toyota 4runner key fob not working

    Lucas 75w90 gear oil review

    • Holosun 507c blinking
    • Parallel lines and transversals ~ angle pairs coloring page answer key
    • The volume shadow copy integration service is not enabled
    • Madden 20 team builder unblocked
    • Polo g capalot
  • P2p vs p2e ecu

  • Power drill home depot rental

  • Smart wallet mobile card holder custom

  • Lycoming o 320 e3d for sale

  • Doge clicker 2 hack

  • Calculating field of view microscope worksheet pdf

  • Pictures of star wars ships

  • 7mm stw vs 7mm rum

Vice president citigroup salary

  • 7zip command line

  • Sirius black x reader lemon wattpad

  • Call recording apk download for jio phone

  • Fundations large sound cards printable

  • Webmin multiple servers

    Text messages on computer iphone

  • John deere 1814e scraper for sale

    My therapist ghosted me reddit

  • J1939 open source

    Water filters not made in china

  • Bedford county tn mugshots

    Classic rock rar

  • Janoel incubator for sale

  • Tecumseh head gasket torque

  • Gaziyabad gesar satta lik jodi

  • Isotherm intelligent temperature control

  • How much do grandfather clock weights weigh

Sours: https://saqn.enzofalcosindaco.it/dual-xvm279bt-firmware-update.html
Dual XDVD156BT Settings and general operation

Dual iPlug

Currently this app controls Dual's Head unit products via Bluetooth.This app controls most of the primary functions of your marine stereo features including:

Mode change - Radio, USB, Bluetooth, iPod, Aux in
Radio - FM1, FM2, FM3, AM1, AM2 and 7-channel Weather band. Seek/Tune frequencies, Access the preset stations, Store the radio stations etc.
USB input - Playback the music from USB connected to the source unit. Search the songs in music list, ID3 display (Song Title, Artist, Album), Track Up / Down, Play / Pause
Bluetooth - Music streaming, Play / Pause, Track Up / Down, ID3 tag display (Song Title, Artist, Album)
iPod/iPhone/iPad control - Playback the music from iPod/iPhone/iPad connected to the source unit via USB port, Play / Pause, Track Up / Down, ID3 Tag Display
Auxiliary input - Audio control
3 Zone speaker control (Zone 1, 2, 3)
7 Preset EQ curves (Pop, Rock, Jazz, Classical, Beat, Flat, User)
3 Band tone control (Bass/Mid/Treble)

For some models, the Dual iPlug app operates just as a remote controller.

*App capabilities vary with the stereo’s feature set.

Sours: https://play.google.com/

Now discussing:

You will send me photos, slut (you promised to obey). You can paint over the face, but in the folder on the desktop the originals. You will also send me some frames from the video. All clear. - Yes, my master, I will do everything.



2761 2762 2763 2764 2765