2017 Toyota Tacoma Bumpers
Jeep®, Wrangler®, Rubicon®, CJ®, Mopar®, Renegade®, Scrambler®, Commando®, Sahara®, SRT® and the Jeep® Grille Design are registered trademarks of FCA US LLC (Fiat Chrysler Automobiles). Westin Automotive Products, Inc. has no affiliation with FCA US LLC. Throughout this website the terms Jeep®, Wrangler®, Rubicon®, CJ®, Mopar®, Renegade®, Scrambler®, Commando®, Sahara®, and SRT® are used strictly for identification purposes only. It is not implied that any part listed is a product of, or approved by, Fiat Chrysler Automobiles. All trademarks and registered trademarks are the property of their respective owners.
For California Residents Only-Prop. 65 Warning
WARNING: Some products may contain chemicals such as DEHP, which can cause cancer, birth defects or other reproductive harm. For more info go to www.p65warnings.ca.gov
Toyota Tacoma 2012-15 Winch Bumper
Frequently Asked Questions:
- Does the winch mount come with winch, fairlead or shackles?
No it does not. Bare steel winch mount and reinforcement plates only. You will use your factory hardware.
- Do you offer combination kits with discounts?
Why yes we do! Look for them in the category of your vehicle below this product listing. These money and time saving kits come with a winch mount, winch and shackles with options for lights and thimbles. They ship free to the lower 48 states via FedEx Ground.
- Do you ship outside of the United States? If so, how much is shipping?
Yes, we ship Internationally and have done so to Europe, Japan, Australia, New Zealand, Chile, Russia, Middle East, well, pretty much every continent, including Antarctica!. It can be expensive as we are shipping a 65+ lb chunk of steel but we are able to ship this in custom made double wall boxes which makes shipping much less expensive than other bumpers.
However, we DO have the ability to obtain special pricing from FedEx on a case by case basis. For example, we have shipped to the Middle East for as little as $200-250, Australia for $275-325.
Please use our contact form to send us your full shipping information for a quote. Please visit our shipping page for more information.
- How much does it cost to ship domestically?
We ship via FedEx Ground here in the 48 states. Add the product to your cart then go to your cart, there you will be given an opportunity to receive a shipping quote based on your address. Typical costs are $30-40 in the central part of the country and $45-60 to each coast. Please visit our shipping page for more information.
- What winches fit this mount?
Just about any winch will work. Read this technical article in our blog for a more in depth answer. The mount uses a standard 10" x 4.5" bolt pattern so any winch will fit and there is plenty of room in the mount itself.
We suggest a winch with a relocatable solenoid box or a winch of your choice that shares the same basic design with a remote solenoid/control box, this way you can locate the box wherever you want it.
Most winch manufacturers have gone to a smaller control box and/or have made it where you can mount over the winch spool or over the motor (passenger) side of the winch, so typically not a problem.
Consider our Combo Kits, they are tried and true!
- What winch rating do you suggest for this application?
That is a big question. Unless you drive an FJ40 or a CJ/TJ you better go with 9000 lbs or larger. Most of what we sell in our combo kits are 9500/10000 to 12000 lb winches. Read this article for a more in depth discussion of winch ratings and overall selection: https://www.usoffroad.us/winch-selection/
- Does the front end need to be lifted after installing this mount and a winch?
Short answer is maybe. Typically you will see a 3/8" to 1/2" drop by adding the mount (57lbs) and a winch (75-90lbs). This is still a much lighter alternative to a full bumper replacement (75-150lbs without a winch!). In our testing we noticed no difference in how a Tacoma drove after installation on a stock vehicle. Having said that, because most vehicles come from the factory with some rake (front lower than rear) it wouldn't hurt to lift it a bit to level things out. Read this article about using the Bilstein adjustable shocks to achieve a more level stance and much better ride vs stock for a reasonable price.
- How hard is it to install?
Not really hard at all. It takes more time to prep and paint/coat the mount than it does to install (we suggest our optional powder coat). Figure 3 - 6 hours depending on the equipment you are installing (just the winch mount, winch, lights, etc?) your abilities and how big of a hurry you are in. You can read the install docs (Documentation Tab above) and watch our customer supplied install videos for more info: https://www.usoffroad.us/fj-cruiser-winch-bumper-installation-videos/ (It's on an FJ but the process is almost identical)
- Will this work with suspension and body lifts?
Our bumpers work fine with any suspension lifts but will NOT work with body lifts as our bumper needs to line up with the bodywork but attaches to the frame. A body lift moves the bodywork in relationship to the frame.
2012-2015 Toyota Tacoma Front Bumper
• Built from CNC cut and brake formed 3/16″ HRPO steel plate.
• 3/4″ thick shackle tabs pass through the bumper and welded front and back.
• 10 bolt locations makes mounting rock solid. Uses only factory holes and studs…no drilling or welding required for install. Includes frame tie-in brackets and grade 8 bolts. If running remote reservoir shocks, modification of shock brackets may be necessary.
• Internal winch plate fits 8-10k winches with non integrated solenoid control boxes (control box must be relocated) with standard 4.5″ x 10″ bolt pattern.
• Includes 21” x 1.50” slot for 20″-21” single row LED light bar. Features adjustable width mounts to fit any brand bar.
• Includes square holes for LED pods with adjustable mounting brackets.
• Hi-Lift jack slots for safer lifting
• Multiple hoop options available (see pics)
• Available in bare steel only
• Not compatible with TRD off road aluminum skid plate.
• Designed, built, and tested in the USA 🇺🇸
NOTE: Fog light locations have been updated. See last pic in photo gallery.
**Bumpers are built to order and lead times vary depending on current workload. Orders can be taken on a $100 deposit, email [email protected] for more info. CURRENT LEAD TIME ON BUMPERS IS SEVEN MONTHS.
Tacoma front bumpers ship truck freight due to their size and weight. Domestic freight ranges from $200-$400 to your nearest terminal or a business address with loading dock or forklift. Please email [email protected] for a shipping quote. Shipping charges will be invoiced when bumper is ready to ship.
Local pickup in Gardnerville NV is welcome!
2012 Toyota Tacoma, 2013 Toyota Tacoma, 2014 Toyota Tacoma, 2015 Toyota Tacoma
W/ Full Hoops Around Headlights, W/ Low Prerunner Hoop, W/ High Center Hoop, W/ Low Center Hoop, Base Bumper No Hoop
The director also put my wife in cancer and fucked her in the ass with pleasure. My wife and I stood with our heads to each other, and when I looked at her, she smiled. It was evident that she was already very well.
Tacoma bumper 2012
I managed to notice that they were not very wet either. she should have seen how wet my excitement is !!. and they were still wet when I suddenly realized that she would be without panties today. oh, sorry, she's not the kind of girlfriends you can have sex with. we went to school, and all the way I thought about further plans.Toyota Tacoma Front Bumper Removal
Come with us, I'll introduce you to everyone. - With pleasure. - Will you take a friend.
- St lukes careers
- Douglas mattress coupons
- Joann thread organizer
- Peter fordos
- James 5 19 kjv
- Snes classic manual
- Interchange 5th edition
- Performa racing
- Derry tax collector
- Kill cliff challenge
- Ramos dragon engine
I heard he's cool. And he is really cool. Okay, grandma, spread your legs wider, bend over, sit down and spread your ass. The old woman obediently bent down and immediately cried out in pain. - Vagina, 4, point 7.